SII Micro Parts Ltd.
20040401
! CAUTION!
! WARNING!
Precautions for Your Safety
SII capacitors (XC, XH) contain flammable organic solvents.
For your safety, please follow following prohibitions.
1. Do not charge by high current or high voltage.
Doing so may generate gas inside the capacitor, resulting,
swelling, catching fire, heat generation or bursting.
2. Do not reverse placement of (+) and (-)
SII capacitors have polarity. If the (+) and (-) side of the capacitor
is reverse inserted, it may cause a short-circuiting or over
discharge of the capacitor on some equipment and it may induce
overheating, explosion or fire.
3. Do not solder directly to the capacitor
If soldering is performed directly to the capacitor, the capacitor is
heated up, consequently cause leakage, explosion or fire due to
overheating from internal short-circuiting.
4. Keep capacitors out of children’s reach.
If leaked liquid is ingested or a capacitor is swallowed, consult a
physician immediately.
5. Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause
catching fire, heat generation, leakage or bursting.
6. Do not discharge by force
If the capacitor is discharged by direct connection to an external
power supply etc., voltage of the capacitor will decline lower than
0 volts (electrical reversal) and will cause the capacitor case to
expand, overheat, leak, explode or burn.
7. Incase of leakage or a strange-smell; keep
away from fire to prevent ignition of any leaked
electrolyte.
1. If leaked liquids gets in the eyes, wash them
with clean water, and consult a physician
immediately.
2. Do not use nor leave the capacitors neither in
direct sunlight nor in high-temperature areas.
It may cause catching fire, heat generation, leakage or bursting.
3. Do not use new and used capacitors together.
Do not use different types of capacitors
together.
It may cause catching fire, heat generation, leakage or bursting.
4. If you connect two or more capacitors in series
or parallel, please consult us in advance.
It may cause bursting or catching fire due to unbalanced load or
voltage..
5. Keep capacitors away from direct sunlight, high
temperature and humidity.
It may cause heat generation or performance deterioration.
For prevention quality trouble in capacitor
1. Do not conduct reflow soldering after charging
the capacitor.
The deterioration of the capacitor shall be caused. In serious
case, the capacitor may start swell and explode or leakage.
2. Pay attention to soldering by tips
Do no touch the capacitor by solder chips, in case of soldering
another components after equipping capacitor. In basically, keep
any high temperature process away from capacitor. (Except for
reflow soldering and underfilling)
3. Pay attention to the operating temperature.
The ambient temperature greatly affects the lifetime of the
capacitor.
By reducing the temperature by 10deg.-C, the lifetime can be
approximately doubled.
4. Do not welding the tab to the capacitor.
The tab welding by inappropriate conditions will lead to damage
or breakage of the capacitor. In serious case, the capacitor may
start swell and leakage or catch fire and explode. If needs
capacitor with tabs, please consult us.
5. Pay attention to washing and drying.
Some detergent or high temperature drying cause deteriorates of
capacitor. If you need to wash capacitors, consult us.
Disposal
Disposal
Recent environmental protection concerns have increased globally and waste and recycling are regulated in the world. The current
regulations differ in each country, state and local municipality. Please consult local regulations and authorities for recommended disposal of
batteries. If you are in question of application or safety of our batteries, please consult your local authorities.
