71016S15PHGI

6.42
IDT71016, CMOS Static RAM
1 Meg (64K x 16-bit) Commercial and Industrial Temperature Ranges
7
Timing Waveform of Write Cycle No. 2 (CS Controlled Timing)
(1,4)
NOTES:
1. A write occurs during the overlap of a LOW CS, LOW BHE or BLE, and a LOW WE.
2. OE is continuously HIGH. If during a WE controlled write cycle OE is LOW, tWP must be greater than or equal to tWHZ + tDW to allow the I/O drivers to turn off and
data to be placed on the bus for the required tDW. If OE is HIGH during a WE controlled write cycle, this requirement does not apply and the
minimum write pulse is as short as the specified tWP.
3. During this period, I/O pins are in the output state, and input signals must not be applied.
4. If the CS LOW or BHE and BLE LOW transition occurs simultaneously with or after the WE LOW transition, the outputs remain in a high-impedance state.
5. Transition is measured ±200mV from steady state.
Timing Waveform of Write Cycle No. 3 (BHE, BLE Controlled Timing)
(1,4)
ADDRESS
CS
DATA
IN
3210 drw 9
DATA
IN
VALID
t
WC
t
AS
(2)
t
CW
t
WR
WE
t
AW
DATA
OUT
t
DW
t
DH
BHE
,
BLE
t
BW
t
WP
,
ADDRESS
CS
DATA
IN
3210 drw 10
DATA
IN
VALID
t
WC
t
AS
(2)
t
CW
t
WR
WE
t
AW
DATA
OUT
t
DW
t
DH
BHE
,
BLE
t
BW
t
WP
,
6.42
8
IDT71016, CMOS Static RAM
1 Meg (64K x 16-bit) Commercial and Industrial Temperature Ranges
Ordering Information
S
Power
XX
Speed
XXX
Package
X
Process/
Temperature
Range
Blank
I
Commercial (0°C to +70°C)
Industrial (-40°C to +85°C)
Y
PH
400-mil SOJ (SO44-1)
400-mil TSOP Type II (SO44-2)
12
*
15
20
71016
Device
Type
Speed in nanoseconds
3210 drw 11
X
G
Green
Blank
8
Tube or Tray
Tape and Reel
X
*
Commercial temperature range only
6.42
IDT71016, CMOS Static RAM
1 Meg (64K x 16-bit) Commercial and Industrial Temperature Ranges
9
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
Datasheet Document History
07/30/99: Updated to new format
080/5/99: Pg. 3 Expressed commercial and industrial ranges on DC Electrical table
Removed Icc, ISB, and ISB1 values for S12 industrial speed
Pg. 5 Expressed commercial and industrial ranges on AC Electrical table
Changed footnote #2 to commercial temperature only
Pg. 6 Revised footnotes on Write Cycle No.1 diagram
Pg. 7 Revised footnotes on Write Cycle No.2 and No.3 diagrams
Pg. 8 Removed SCD 2752 footnote
Added commercial only for 12ns speed
08/13/99: Pg. 9 Added Datasheet Document History
09/30/99: Pg. 3, 5, 8 Added 12ns industrial temperature speed grade offering
08/09/00: Not recommended for new designs
02/01/01: Removed "Not recommended for new designs"
01/30/04: Pg. 8 Added "Restricted hazardous substance device" to order information
01/30/06: Pg. 3 Updated Capacitance table to include TSOP
02/13/07: Pg. 8 Added N generation die step to data sheet ordering information
10/13/08: Pg. 8 Removed "IDT" from orderable part number
09/25/13: Pg. 1 Updated Commercial and Industrial speed grade offerings
Removed IDT reference to fabrication
Pg. 3 Removed Commercial TA information from the Absolute Maximum Ratings table
Removed Ind. temp values for the 12ns speed grade from the DC Elec Chars table
Pg. 5 Added the footnote annotation to the AC Elec Chars table and the footnote for 12ns commercial only
Pg. 8 Added T & R to, updated Restricted Hazardous Substance Device wording to "Green", added
annotation indicating "Commercial temperature range only" and removed Die Stepping indicator from
the ordering information
CORPORATE HEADQUARTERS for SALES:
6024 Silver Creek Valley Road 800-345-7015 or
San Jose, CA 95138 408-284-8200
fax: 408-284-2775
www.idt.com
for Tech Support:
sramhelp@idt.com
408-284-4532

71016S15PHGI

Mfr. #:
Manufacturer:
IDT
Description:
SRAM 64Kx16 ASYNCHRONOUS 5.0V STATIC RAM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union