NCP5210
http://onsemi.com
16
Table 2. Bill of Material of NCP5210 Application Circuit
Ref Design Description Value Qty Part # Manufacturer
Q1, Q2 Power MOSFET N−Channel 24 V, 4.8 m, 85 A 2 NTD85N02R ON Semiconductor
Q3, Q4 Power MOSFET N−Channel 25 V, 12.6 m, 40 A 2 NTD40N03R ON Semiconductor
D1, D2 Rectifier Schottky Diode 30 V 2 BAT54HT1 ON Semiconductor
U1 Controller 3−in−1 PWM Dual Buck
and Linear Power
Controller
1 NCP5210 ON Semiconductor
Zener Zener Diode 13 V, 0.5 W 1 MMSZ13T1 ON Semiconductor
L1 Toroidal Choke 1.0 H, 25 A 1 T60−26(6T)
L2, L3 Toroidal Choke 1.8 H, 25 A 2 T50−26B(6T)
C2, C3 Aluminum Electrolytic Capacitor 3300 F, 6.3 V 2 EEUFJ0J332U Panasonic
C5 Aluminum Electrolytic Capacitor 470 F, 35 V 1 EEUFC1V471 Panasonic
C21 Aluminum Electrolytic Capacitor 100 F, 50 V 1 EEUFC1H101 Panasonic
C20 Aluminum Electrolytic Capacitor 470 F, 16 V 1 EEUFC1C471 Panasonic
C13, C24 Aluminum Electrolytic Capacitor 470 F, 10 V 2 EEUFC1A471 Panasonic
C7, C25, C15, C26 Aluminum Electrolytic Capacitor 2200 F, 6.3 V 4 EEUFC0J222SL Panasonic
C11 Ceramic Capacitor 220 nF, 10 V 1 ECJ1VB1A224K Panasonic
C6, C12, C14 Ceramic Capacitor 4.7 F, 6.3 V 3 ECJHVB0J475M Panasonic
C22, C23 Ceramic Capacitor 10 F, 25 V 2 ECJ4YB1E106M Panasonic
C4 Ceramic Capacitor 22 nF, 25 V 1 ECJ1VB1E223K Panasonic
C10, C17 Ceramic Capacitor 6.8 nF, 50 V 2 ECJ1VB1H682K Panasonic
C9, C18 Ceramic Capacitor 100 nF, 16 V 2 ECJ1VB1C104K Panasonic
C8, C16 Ceramic Capacitor 10 nF, 50 V 2 ECJ1VB1H103K Panasonic
C1 Ceramic Capacitor 33 nF, 25 V 1 ECJ1VB1E333K Panasonic
R2 Resistor 2.2 1
R4 Resistor 1.0 1
R9, R10 Resistor 4.7 2
R3, R15, R16, R17 Resistor 1.0 k 4
R7, R12 Resistor 20 k 2
R6, R13 Resistor 8.2 2
R8, R14 Resistor 2.0 k 2
R5, R11 Resistor 2.2 k 2
R18 Resistor 51 k 1
NCP5210
http://onsemi.com
17
PACKAGE DIMENSIONS
QFN−20, DUAL−SIDED, 6x5 mm
MN SUFFIX
CASE 505AB−01
ISSUE A
C0.15
E2
D2
L
b20X
A
D
NOTES:
1. DIMENSIONS AND TOLERANCING PER
ASME Y14.5M, 1994.
2. DIMENSIONS IN MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINALS AND IS MEASURED BETWEEN
0.25 AND 0.30 MM FROM TERMINAL
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
E
C
e
A
B
DIM MIN MAX
MILLIMETERS
A 0.80 1.00
A1 0.00 0.05
A2 0.65 0.75
A3 0.20 REF
b 0.23 0.28
D 6.00 BSC
D2 3.98 4.28
E 5.00 BSC
E2 2.98 3.28
e 0.50 BSC
K 0.20 −−−
L 0.50 0.60
C0.15
PIN 1 LOCATION
A1
(A3)
SEATING
PLANE
C0.08
C0.10
A2
20X
K20X
A0.10 BC
0.05
C
NOTE 3
110
1120
2X
2X
TOP VIEW
SIDE VIEW
BOTTOM VIEW
NCP5210
http://onsemi.com
18
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
NCP5210/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.

NCP5210MNR2

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Switching Controllers 3-in-1 DDR Power
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet