Data Sheet HMC220B
Rev. A | Page 17 of 18
APPLICATIONS INFORMATION
EVALUATION PCB INFORMATION
The PCB used in this application must use RF circuit design
techniques. Signal lines must have 50 Ω impedance, and the
package ground lead and exposed pad must be connected
directly to the ground planes. The evaluation PCB shown in
Figure 52 is available from Analog Devices, Inc., upon request.
TYPICAL APPLICATIONS CIRCUIT
1
2
3
4
8
7
6
5
HMC220B
15769-051
LO
RF
IF
Figure 51. Typical Applications Circuit
Figure 52. EV1HMC220BMS8G Evaluation PCB
Table 5. EV1HMC220BMS8G PCB Components
Item Description
Reference
Designator
Quantity Manufacturer Part Number
1 PCB, EV1HMC220BMS8G 1 Analog Devices 101828-8
2 2.92 mm Subminiature Version A (SMA) connector J1, J2 2 SRI Connector Gage 21-146-1000-01
3 SMA connector, end launch J3 1 Cinch Connectivity
Solutions Johnson
142-0701-851
4 Device under test (DUT) U1 1 Analog Devices HMC220BMS8GE