18 Mini Motor Contactor J7KNA
Mini Motor Contactors
Data according to IEC 947-5-1, VDE 0660, EN 60947-5-1
Auxiliary Contacts Type
J7KNA-09...
J7KNA-12...
J7KNA-09...D(VS)
J7KNA-12...D(VS) J73KN-A...
Rated insulation voltage UU
i
V AC 690
*1
690
*1
690
*1
Thermal rated current I
th
to 690V
Ambient temperature 40°C A 10 10 10
60°CA666
Power loss per pole at I
th
W 0.5 0.5 0.5
Utilization category AC15
Rated operational current I
e
220-240V A 3 3 3
380-415V A 2 2 2
440V A 1.6 1.6 1.6
500V A 1.2 1.2 1.2
660-690V A 0.6 0.6 0.6
Utilization category DC13
Rated operational current I
e
60VA222
110V A 0.4 0.4 0.4
220V A 0.1 0.1 0.1
Maximum ambient temperature
Operation open °C -40 to +60 (+90)
*2
enclosed °C -40 to +40
Storage °C -40 to +90
Short circuit protection
short-circuit current 1kA,
contact welding not accepted
max. fuse size gL (gG) A 20 20 20
For contactors with thermal overload relay the
device with the smaller admissible control fuse
(contactor or thermal overload relay)
determines the fuse size.
Power consumption of coils
AC operated inrush VA 25 - -
sealed VA 4 - 5 - -
W1.2 - -
DC operated inrush W - 2.5 -
sealed W - 2.5 -
Operation range of coils
in multiples of control voltage U
s
19 - 30V DC
0.85 - 1.1 0.8 - 1.1 -
Switching time at control voltage U
s
±10%
*3,*4
AC operated make time ms 15 - 25 - -
release time ms 8 - 25 - -
arc duration ms 10 -15 - -
DC operated make time ms - 15 - 19 -
release time ms - 8 - 25 -
arc duration ms - 10 -15 -