Sensing and Control
Honeywell
1985 Douglas Drive North
Minneapolis, MN 55422
www.honeywell.com/sensing
009018-3-EN IL50 GLO Printed in USA
April 2010
© 2010 Honeywell International Inc. All rights reserved.
Order Guide
Package Style and Size
mm [in]
Nominal
Resistance
at 0 °C
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class A
(R
0
: ±0.06 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class 2B
(R
0
: ±0.24 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class A
(R
0
: ±0.06 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 2,1 w x 2,3 l x 0,9 thk
[0.083 w x 0.091 l x 0.035 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 1,25 w x 1,7 l x 0,8 thk
[0.049 w x 0.067 l x 0.031 thk]
DIN EN 60751, class A
(R
0
: ±0.06 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 1,25 w x 1,7 l x 0,8 thk
[0.049 w x 0.067 l x 0.031 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 1,25 w x 1,7 l x 0,8 thk
[0.049 w x 0.067 l x 0.031 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
chip, 1,25 w x 1,7 l x 0,8 thk
[0.049 w x 0.067 l x 0.031 thk]
DIN EN 60751, class B
(R
0
: ±0.12 %)
bare Pt-clad Ni wire, adjacent
leads
SMD 0805, 1,4 w x 2,3 l x 0,52 thk
[0.055 w x 0.091 l x 0.020]
DIN EN 60751, class B
(R
0
: ±0.12 %)
end termination, galvanic Sn-
plated with Ni barrier layer
SMD 0805, 1,4 w x 2,3 l x 0,52 thk
[0.055 w x 0.091 l x 0.020]
DIN EN 60751, class B
(R
0
: ±0.12 %)
end termination, galvanic Sn-
plated with Ni barrier layer
SMD 1206, 1,65 w x 3,25 l x 0,6 thk
[0.065 w x 0.128 l x 0.024]
DIN EN 60751, class B
(R
0
: ±0.12 %)
end termination, galvanic Sn-
plated with Ni barrier layer
SMD 1206, 1,65 w x 3,25 l x 0,6 thk
[0.065 w x 0.128 l x 0.024]
DIN EN 60751, class B
(R
0
: ±0.12 %)
end termination, galvanic Sn-
plated with Ni barrier layer
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices
or in any other application where failure of the product could result in
personal injury.
Failure to comply with these instructions could result in death
or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective
materials and faulty workmanship. Honeywell’s standard product
warranty applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgement or consult your local sales
office for specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair or
replace, at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no event
shall Honeywell be liable for consequential, special, or indirect
damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we supply
is believed to be accurate and reliable as of this printing. However, we
assume no responsibility for its use.
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for reference
only. Do not use this document as a product installation guide.
Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death
or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network of sales
offices, representatives and distributors. For application assistance,
current specifications, pricing or name of the nearest Authorized
Distributor, contact your local sales office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828
+65 6445-3033 Fax
Europe +44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
