OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

5962-8773802GA

P1-P3P4-P6P7-P9P10-P12P13-P14
REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
A
Add device type 03. Remove vendor CAGE 64155 for device type 02.
Remove vendor CAGE 06665. Make changes to table I, 1.2.2, figure 1, and
editorial changes throughout.
93-03-17 M. A. FRYE
B
Table I. Long term input voltage stability test. Under group A subgroups
column, delete 2 and 3 entirely. Average input offset voltage drift test.
Under group A subgroup column, delete 1 entirely.
Changes in accordance with NOR 5962-R219-94.
94-07-08 M. A. FRYE
C
Add vendor CAGE 24355 to device type 02, and class V for case outlines 2,
and H. Update to current boiler plate and editorial changes throughout.
Redrawn.
97-05-30 R. MONNIN
D Replaced reference to MIL-STD-973 with reference to MIL-PRF-38535. -rrp 03-07-16 R. MONNIN
E
Make correction to the Average input offset voltage drift max test limit in
table I by deleting “10 V/C” and substituting “1.0 V/C”.
Update boilerplate paragraphs to current MIL-PRF-38535 requirements. - ro
11-01-20 C. SAFFLE
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV E E E E E E E E E E E E
OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12
PMIC N/A PREPARED BY
Charles E. Besore
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
Raymond Monnin
APPROVED BY
D. A. DiCenzo
MICROCIRCUIT, LINEAR, PRECISION, LOW
OFFSET, OPERATIONAL AMPLIFIER,
MONOLITHIC SILICON
DRAWING APPROVAL DATE
88-07-26
AMSC N/A
REVISION LEVEL
E
SIZE
A
CAGE CODE
67268
5962-87738
SHEET 1 OF 12
DSCC FORM 2233
APR 97 5962-E458-10
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-87738
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
E
SHEET
2
DSCC FORM 2234
APR 97
1. SCOPE
1.1 Scope
. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and
M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part
or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.
1.2 PIN. The PIN is as shown in the following examples.
For device classes M and Q:
5962 - 87738 01 X A
Federal
stock class
designator
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
\ /
\/
Drawing number
For device class V:
5962 - 87738 01
V X A
Federal
stock class
designator
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Device
class
designator
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
\ / (see 1.2.3)
\/
Drawing number
1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A
specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type Generic number Circuit function
01 LT1001, OP-77B Precision operational amplifier
02 OP-77A Precision operational amplifier
03 LT1001A Precision operational amplifier
1.2.3 Device class designator
. The device class designator is a single letter identifying the product assurance level as listed
below. Since the device class designator has been added after the original issuance of this drawing, device classes M and Q
designators will not be included in the PIN and will not be marked on the device.
Device class
Device requirements documentation
M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-
JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A
Q or V Certification and qualification to MIL-PRF-38535
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-87738
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
E
SHEET
3
DSCC FORM 2234
APR 97
1.2.4 Case outline(s)
. The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
G MACY1-X8 8 Can
H GDFP1-F10 or CDFP2-F10 10 Flat pack
P GDIP1-T8 or CDIP2-T8 8 Dual-in-line
2 CQCC1-N20 20 Square leadless chip carrier
1.2.5 Lead finish
. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings
. 1/
Supply voltage (V
S
) ..................................................................................... 22.0 V dc
Internal power dissipation ........................................................................... 500 mW
Input voltage ............................................................................................... 22.0 V dc 2
/
Differential input voltage .............................................................................. 30 Vdc
Output short-circuit duration ........................................................................ Indefinite
Lead temperature (soldering, 10 seconds) .................................................. +300C
Storage temperature range ......................................................................... -65C to +150C
Thermal resistance, junction-to-case (
JC
) ................................................. See MIL-STD-1835
Thermal resistance, junction-to-ambient (
JA
):
Case G ..................................................................................................... +150C/W
Case P ...................................................................................................... +119C/W
Case 2 ...................................................................................................... +110C/W
Case H ..................................................................................................... +150C/W
Junction temperature (T
J
) ........................................................................... +150C
1.4 Recommended operating conditions
.
Supply voltage range (V
S
) ........................................................................... 3 V dc to 18 V dc
Ambient operating temperature range (T
A
) ................................................. -55C to +125C
_____
1
/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2
/ For supply voltage less than 22 V, the absolute maximum input voltage is equal to the supply voltage.
P1-P3P4-P6P7-P9P10-P12P13-P14

5962-8773802GA

Mfr. #:
Buy 5962-8773802GA
Manufacturer:
Analog Devices Inc.
Description:
Precision Amplifiers LOW OFFSET VTG OP AMP IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet