STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 11-01-20
Approved sources of supply for SMD 5962-87738 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information
bulletin is superseded by the next dated revision of MIL-HDBK-103 and QML-38535. DLA Land and Maritime
maintains an online database of all current sources of supply at http://www.dscc.dla.mil/Programs/Smcr/
.
Standard
microcircuit drawing
PIN 1
/
Vendor
CAGE
number
Vendor
similar
PIN 2
/
5962-8773801GA 3/ OP-77BT/883B
3/ OP-77BJ/883
3/ LT1001MH/883B
5962-8773801GC 3/ OP-77BT/883B
5962-8773801PA 3/ OP-77BD/883B
3/ OP-77BZ/883
3/ LT1001MJ8/883B
5962-87738012A 3/ OP-77BRC/883
5962-8773802GA 24355 (2) OP-77AJ/883
3/ OP-77AT/883
5962-8773802GC 3/ OP-77AT/883B
5962-8773802PA 24355 (2) OP-77AZ/883
3/ OP-77AD/883
5962-8773802VGA 24355 (4) OP77AJ/QMLV
5962-8773802VHA 24355 (4) OP77AL/QMLV
5962-8773802VPA 24355 (4) OP77AZ/QMLV
5962-8773802V2A 24355 (4) OP77ARC/QMLV
5962-8773803GA 3/ LT1001AMH/883
5962-8773803PA 3/ LT1001AMJ8/883
1
/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2
/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3
/ Not available from an approved source of supply.
1 of 2