NB7L72MMNHTBG

NB7L72M
www.onsemi.com
7
Driver
Device
Receiver
Device
QD
Figure 12. Typical Termination for CML Output Driver and Device Evaluation
Q D
V
CC
50 W50 W
Z = 50 W
Z = 50 W
DUT
LVPECL
Driver
V
CC
GND
Z
O
= 50 W
VT = V
CC
− 2 V
Z
O
= 50 W
NB7L72M
IN
50 W
50 W
IN
GND
Figure 13. LVPECL Interface
LVDS
Driver
V
CC
GND
Z
O
= 50 W
V
T
= Open
Z
O
= 50 W
NB7L72M
IN
50 W
50 W
IN
GND
Figure 14. LVDS Interface
V
CC
V
CC
CML
Driver
V
CC
GND
Z
O
= 50 W
V
T
= V
CC
Z
O
= 50 W
NB7L72M
IN
50 W
50 W
IN
GND
V
CC
Figure 15. Standard 50 W Load CML Interface
Differential
Driver
V
CC
GND
Z
O
= 50 W
VT = V
REFAC
*
Z
O
= 50 W
NB7L72M
IN
50 W
50 W
IN
GND
V
CC
Figure 16. Capacitor−Coupled
Differential Interface
(VT Connected to External V
REFAC
)
*V
REFAC
bypassed to ground with a 0.01 mF capacitor
ORDERING INFORMATION
Device Package Shipping
NB7L72MMNG QFN16
(Pb−free)
123 Units / Rail
NB7L72MMNTXG QFN16
(Pb−free)
3000 / Tape & Reel
NB7L72MMNHTBG QFN16
(Pb−free)
100 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
NB7L72M
www.onsemi.com
8
PACKAGE DIMENSIONS
QFN16 3x3, 0.5P
CASE 485G
ISSUE F
16X
SEATING
PLANE
L
D
E
0.10 C
A
A1
e
D2
E2
b
1
4
8
9
16
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.25 AND 0.30 MM FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
B
A
0.10 C
TOP VIEW
SIDE VIEW
BOTTOM VIEW
PIN 1
LOCATION
0.05 C
0.05 C
(A3)
C
NOTE 4
16X
0.10 C
0.05 C
A B
NOTE 3
K
16X
L1
DETAIL A
L
ALTERNATE TERMINAL
CONSTRUCTIONS
A1
A3
L
DETAIL B
MOLD CMPDEXPOSED Cu
ALTERNATE
CONSTRUCTIONS
DETAIL A
DETAIL B
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
RECOMMENDED
2X
0.50
PITCH
1.84
3.30
1
DIMENSIONS: MILLIMETERS
0.58
16X
2X
0.30
16X
OUTLINE
PACKAGE
2X
2X
0.10 C A B
e/2
SOLDERING FOOTPRINT*
DIM MIN NOM MAX
MILLIMETERS
A 0.80 0.90 1.00
A1 0.00 0.03 0.05
A3 0.20 REF
b 0.18 0.24 0.30
D 3.00 BSC
D2 1.65 1.75 1.85
E 3.00 BSC
E2 1.65 1.75 1.85
e 0.50 BSC
K 0.18 TYP
L 0.30 0.40 0.50
L1 0.00 0.08 0.15
NB7L72M/D
GigaComm is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf
. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative

NB7L72MMNHTBG

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Clock Drivers & Distribution 2.5/3.3V XPOINT SWITCH
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet