NCP1601A, NCP1601B
http://onsemi.com
19
PACKAGE DIMENSIONS
8LEADPDIP
CASE 626 --05
ISSUE M
14
58
F
NOTE 5
D
e
b
L
A1
A
E3
E
A
TOP VIEW
C
SEATING
PLANE
0.010 CA
SIDE VIEW
END VIEW
END VIEW
NOTE 3
DIM MIN NOM MAX
INCHES
A -- -- -- -- -- -- -- -- 0 . 2 1 0
A1 0 . 0 1 5 -- -- -- -- -- -- -- --
b 0.014 0.018 0.022
C 0.008 0.010 0.014
D 0.355 0.365 0.400
D1 0 . 0 0 5 -- -- -- -- -- -- -- --
e 0.100 BSC
E 0.300 0.310 0.325
L 0.115 0.130 0.150
-- -- -- -- -- -- -- -- 5 . 3 3
0 . 3 8 -- -- -- -- -- -- -- --
0.35 0.46 0.56
0.20 0.25 0.36
9.02 9.27 10.02
0 . 1 3 -- -- -- -- -- -- -- --
2.54 BSC
7.62 7.87 8.26
2.92 3.30 3.81
MIN NOM MAX
MILLIMETERS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION E IS MEASURED WITH THE LEADS RE-
STRAINED PARALLEL AT WIDTH E2.
4. DIMENSION E1 DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
E1 0.240 0.250 0.280 6.10 6.35 7.11
E2
E3 -- -- -- -- -- -- -- -- 0 . 4 3 0 -- -- -- -- -- -- -- -- 1 0 . 9 2
0.300 BSC 7.62 BSC
E1
D1
M
8X
e/2
E2
c
ON Semiconductor and are registered trademarks of Semiconductor Components Industries , LLC (SCILLC). SCILLC reserves the right to mak e changes without further noti ce
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specificall y disc laims any and all liability, including without limitation special, consequential or incidental
damages. “Typi cal” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary i n different applications and ac tual performance may vary over
time. All operating parameters, including “Typic als” must be validated for each customer application by customer’s technic al ex perts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, i ntended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situat ion where personal injury or death
may oc cur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized appl ication, B uyer shall indemnify and hold SCILLC and its officers, emplo yees,
subsidiaries, affiliates, and distributors harmless against all claims , costs, damages, and expenses, and reasonable attorney fees aris ing out of, directly or indirectly, any claim of
personal injury or death ass ociated with such unintended or unauthorized use, even if s uch claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Ac tion Employer. This literature is subject to all applicable copyright laws and is not for resale i n any manner.
NCP1601A/D
PUBLICATION O RDERING INFORMATION
N. American T echnical Support: 800--282 --9855 Tol l Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81--3--5773--3850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303--675--2175 or 800--344--3860 Toll Free USA/Canada
Fax: 303--675--2176 or 800--344--3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loca
Sales Representative
