CS5530
6 DS742F3
ANALOG CHARACTERISTICS (Continued)
(See Notes 1 and 2.)
7. All outputs unloaded. All input CMOS levels.
8. Tested with 100 mV change on VA+ or VA-.
TYPICAL NOISE-FREE RESOLUTION (BITS) (See Notes 9 and 10)
9. Noise Free Resolution listed is for Bipolar operation, and is calculated as LOG((Input Span)/(6.6xRMS
Noise))/LOG(2) rounded to the nearest bit. For Unipolar operation, the input span is 1/2 as large, so one
bit is lost. The input span is calculated in the analog input span section of the data sheet. The Noise
Free Resolution table is computed with a value of 1.0 in the gain register. Values other than 1.0 will
scale the noise, and change the Noise Free Resolution accordingly.
10. “Noise Free Resolution” is not the same as “Effective Resolution”. Effective Resolution is based on the
RMS noise value, while Noise Free Resolution is based on a peak-to-peak noise value specified as 6.6
times the RMS noise value. Effective Resolution is calculated as LOG((Input Span)/(RMS
Noise))/LOG(2).
Specifications are subject to change without notice.
Parameter
CS5530-CS
Min Typ
Max
Unit
Power Supplies
DC Power Supply Currents (Normal Mode) I
A+,
I
A-
I
D+
-
-
6
0.6
8
1.0
mA
mA
Power Consumption Normal Mode (Note 7)
Standby
Sleep
-
-
-
35
5
500
45
-
-
mW
mW
µW
Power Supply Rejection (Note 8)
DC Positive Supplies
DC Negative Supply
-
-
115
115
-
-
dB
dB
Output Word Rate (Sps) -3 dB Filter Frequency (Hz) Noise-free Bits
Noise (nV
rms
)
7.5 1.94 19 17
15 3.88 19 24
30 7.75 18 34
60 15.5 18 48
120 31 17 68
240 62 16 115
480 122 16 163
960 230 15 229
1,920 390 15 344
3,840 780 13 1390
