Absolute Maximum Ratings TSH300
2/18
1 Absolute Maximum Ratings
Table 1. Key parameters and their absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply Voltage
(1)
1. All voltage values are measured with respect to the ground pin.
6V
V
id
Differential Input Voltage
(2)
2. Differential voltage is between the non-inverting input terminal and the inverting input terminal.
+/-0.5 V
V
in
Input Voltage Range
(3)
3. The magnitude of input and output voltage must never exceed V
CC
+0.3V.
+/-2.5 V
T
oper
Operating Free Air Temperature Range -40 to +85 °C
T
stg
Storage Temperature -65 to +150 °C
T
j
Maximum Junction Temperature 150 °C
R
thja
Thermal Resistance Junction to Ambient
SOT23-5L
SO8
250
150
°C/W
R
thjc
Thermal Resistance Junction to Case
SOT23-5L
SO8
80
28
°C/W
P
max
Maximum Power Dissipation
(4)
(@Ta=25°C) for Tj=150°C
SOT23-5L
SO8
4. Short-circuits can cause excessive heating. Destructive dissipation can result from short circuits on amplifiers.
500
830
mW
ESD
HBM: Human Body Model
(5)
(all packages)
5. Human body model, 100pF discharged through a 1.5kΩ resistor into P
min
of device.
1kV
MM: Machine Model
(6)
(all packages)
6. This is a minimum value. Machine model ESD, a 200pF cap is charged to the specified voltage, then
discharged directly into the IC with no external series resistor (internal resistor < 5Ω), into pin to pin of device.
150 V
CDM: Charged Device Model (SO8) 1.5 kV
Latch-up Immunity 200 mA
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply Voltage
(1)
1. Tested in full production at 5V (±2.5V) supply voltage.
4.5 to 5.5 V
V
icm
Common Mode Input Voltage -1.5 to +1.6 V