Electrical Characteristics TSH300
4/18
Noise and distortion
eN
Equivalent Input Noise Voltage
see application note on page 13
F = 100kHz 0.65
0.77
(1)
nV/√Hz
iN
Equivalent Input Noise Current (+)
see application note on page 13
F = 100kHz 3.3
5.5
(1)
pA/√Hz
SFDR
Spurious Free Dynamic Range
The highest harmonic of the output
spectrum when injecting a filtered sine
wave
V
out
= 2Vp-p, Gain = +5,
R
L
= 100Ω, F = 10MHz
55 dBc
1. This parameter is guaranteed by design and evaluated using corner lots. This value is not tested in full production.
Table 3. Electrical characteristics for V
CC
= ±2.5V, T
amb
= 25°C (unless otherwise specified)
Symbol Parameter Test Condition Min. Typ. Max. Unit