MCR-SL-CUC-...-...
104059_en_05 PHOENIX CONTACT 4
Connection data
Outside diameter of input 32 mm Ø
Power supply/output conductor cross-section
Solid (minimum/maximum)
Stranded (minimum/maximum)
Stranded with ferrule without plastic sleeve (minimum/maximum)
Stranded with ferrule with plastic sleeve (minimum/maximum)
AWG/kcmil (minimum/maximum)
0.2...2.5mm
2
0.2...2.5mm
2
0.25 ... 2.5 mm
2
0.25 ... 1.5 mm
2
24 ... 14
Stripping length (power supply/output) 10 mm
General data
Supply voltage 24 V DC
Supply voltage range U
B
20 ... 30 V DC
Current consumption
MCR-SL-CUC-...-I
MCR-SL-CUC-...-U
30 mA + I
OUT
30 mA
Power consumption
At U
Bmax
= 30 V and I
OUT
= 25 mA 1.65 W
Transmission error
Under nominal conditions (25°C) < ±1% of range final value (I
N
)
Linearity error < ±1% of range final value (I
N
)
Temperature coefficient
0 … 60°C
-40 … 65°C
±3.2 µA/K
±6.4 µA/K
Step response (90% of I
N
) 150 ms
Ambient temperature range
Operation
Storage
-40°C ... +65°C
-40°C ... +85°C
Safe isolation according to EN 61010
Rated insulation voltage
300 V AC
Test voltage
Input/output
Input/power supply
3.5 kV, 50 Hz, 1 min.
3.5 kV, 50 Hz, 1 min.
Surge voltage category (measurement category according to EN 61010) III
Pollution degree 2
Degree of protection IP20
Dimensions (W x H x D) 90 mm x 70 mm x 33.8 mm
Housing version Frianyl B63 V0 GV30
The current transducer housing meets the requirements of
UL94-V0 regarding inflammability characteristics.
Approvals
UL, USA / Canada (does not apply to 2308085, 2308098)
Conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
EMC requirements regarding noise immunity and noise emission EN 61326-1:2006
General requirements regarding electrical safety EN 61010-1:2001
