AR0130CS
www.onsemi.com
32
DC Electrical Characteristics
The DC electrical characteristics are shown in Table 15,
Table 16, Table 17, and Table 18.
Table 15. DC ELECTRICAL CHARACTERISTICS
Symbol
Definition Condition Min Typ Max Unit
V
DD
Core Digital Voltage 1.7 1.8 1.95 V
V
DD
_IO I/O Digital Voltage 1.7/2.5 1.8/2.8 1.9/3.1 V
V
AA
Analog Voltage 2.5 2.8 3.1 V
V
AA
_PIX Pixel Supply Voltage 2.5 2.8 3.1 V
V
DD
_PLL PLL Supply Voltage 2.5 2.8 3.1 V
V
DD
_SLVS Digital Supply Voltage Do not connect. − − − V
V
IH
Input HIGH Voltage V
DD
_IO * 0.7 – – V
V
IL
Input LOW Voltage – – V
DD
_IO * 0.3 V
I
IN
Input Leakage Current No Pull-up Resistor;
V
IN = V
DD
_IO or D
GND
20 – –
mA
V
OH
Output HIGH Voltage V
DD
_IO – 0.3 – – V
V
OL
Output LOW Voltage – – 0.4 V
I
OH
Output HIGH Current At Specified V
OH
–22 – – mA
I
OL
Output LOW Current At Specified V
OL
– – 22 mA
CAUTION: Stresses greater than those listed in Table 16 may cause permanent damage to the device. This is a stress rating only, and
functional operation of the device at these or any other conditions above those indicated in the operational sections of this
specification is not implied.
Table 16. ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Minimum Maximum Unit
V
SUPPLY
Power Supply Voltage (All Supplies) –0.3 4.5 V
I
SUPPLY
Total Power Supply Current – 200 mA
I
GND
Total Ground Current – 200 mA
V
IN
DC Input Voltage –0.3 V
DD
_IO + 0.3 V
V
OUT
DC Output Voltage –0.3 V
DD
_IO + 0.3 V
T
STG
Storage Temperature (Note 16) –40 +85 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
16.Exposure to absolute maximum rating conditions for extended periods may affect reliability.
17.To keep dark current and shot noise artifacts from impacting image quality, keep operating temperature at a minimum.
Table 17. OPERATING CURRENT CONSUMPTION IN PARALLEL OUTPUT
(Operating currents are measured at the following conditions: V
AA
= V
AA
_PIX = V
DD
_IO = V
DD
_PLL = 2.8 V; V
DD
= 1.8 V;
PLL Enabled and PIXCLK = 74.25 MHz; T
A
= 25°C)
Symbol
Parameter Condition Min Typ Max Unit
I
DD
1 Digital Operating Current Streaming, 1280 x 960 45 fps − 40 65 mA
I
DD
_IO I/O Digital Operating Current Streaming, 1280 x 960 45 fps − 35 – mA
I
AA
Analog Operating Current Streaming, 1280 x 960 45 fps − 30 55 mA
I
AA
_PIX Pixel Supply Current Streaming, 1280 x 960 45 fps − 10 15 mA
I
DD
_PLL PLL Supply Current Streaming, 1280 x 960 45 fps − 7 − mA
I
DD
1 Digital Operating Current Streaming, 720p 60 fps − 40 − mA
I
DD
_IO I/O Digital Operating Current Streaming, 720p 60 fps − 35 – mA
I
AA
Analog Operating Current Streaming, 720p 60 fps − 30 − mA