OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HLMP-C008-U0000

P1-P3P4-P6P7-P9P10-P11
HLMP-Cx08 Series, HLMP-Cx25 Series
HLMP-Cx27 Series, HLMP-C610
T-1
3
/
4
(5 mm) AlInGaP Lamps
Data Sheet
Features
• High intensity
• General purpose leads
• Popular 5 mm diameter
• Available in bulk, tape and reel, or ammopack
• 8° or 25° viewing angles
• Choice of colors: Amber or Red
Applications
• Indoor/outdoor applications
• Small store-front signs
• Message panels
• Road construction barrier lights
• Center high mount stop lights
• Spoiler, car decorative lighting
• Motorcycle/bicycle warning lights
Description
The HLMP-Cx08, HLMP-Cx25, HLMP-Cx27, and HLMP-C610
series are 5 mm lamps specially designed for applications
requir-ing very high on-axis intensity that is not achiev-
able with a standard lamp. These devices are capable of
producing light output over a wide range of drive currents.
Built using AlInGaP technology, they are well suited for
typical 5 mm TS-AlGaAs lamp applications, and have sig-
nicantly SUPERIOR RELIABILITY than most TS-AlGaAs
lamps in wet/hot environments. These lamps come with
clear non-diused lens and are optically designed to yield
superior light output.
Device Selection
Part Number Stando
Typical Viewing
Angle
[1]
(degrees),
2q
1/2
Luminous Intensity,
Iv (mcd) @ 20 mA
Color
Dominant
Wavelength
[2]
Min. Typ.
HLMP-C008-U00xx No 8 2900 6000 Red 626
HLMP-C208-S00xx 8 2600 3000 Amber 590
HLMP-C608-R00xx 8 1000 2000 Red 635
HLMP-C610-R00xx Yes 8 1000 2000 Red 635
HLMP-C025-P00xx No 25 500 1000 Red 626
HLMP-C225-O00xx 25 450 800 Amber 590
HLMP-C625-P00xx 25 500 700 Red 635
HLMP-C027-P00xx Yes 25 500 1000 Red 626
HLMP-C627-P00xx 25 500 700 Red 635
HLMP-C325-P00xx No 25 500 Orange 605
Notes:
1. q
1
/
2
is the o-axis angle at which the luminous intensity is half of the axial luminous intensity.
2. The dominant wavelength, l
d
, is derived from the CIE chromaticity diagram and represents the single wavelength that denes the color of the
device.
2
6.10 (0.240)
5.46 (0.215)
1.27
(0.050)
NOM.
2.54
(0.100)
0.45
(0.018)
SQ. NOM.
CATHODE
LEAD
25.40
(1.000)
MIN.
NOM.
5.21 (0.205)
4.70 (0.185)
13.50 (0.53)
13.30 (0.52)
1.07 (0.042)
0.56 (0.022)
9.14 (0.360)
8.38 (0.330)
1.32 (0.052)
1.02 (0.040)
6.10 (0.240)
5.46 (0.215)
1.27
(0.050)
NOM.
2.54
(0.100)
0.45
(0.018)
SQ. NOM.
CATHODE
LEAD
25.40
(1.000)
MIN.
NOM.
5.21 (0.205)
4.70 (0.185)
1.07 (0.042)
0.56 (0.022)
9.14 (0.360)
8.38 (0.330)
0.65 (0.026) MAX.
1.00 (0.040) MAX. EPOXY MENISCUS
1.00 (0.040) MAX. EPOXY MENISCUS
6.10 (0.240)
5.46 (0.215)
1.27
(0.050)
NOM.
2.54
(0.100)
0.45
(0.018)
SQ. NOM.
CATHODE
LEAD
25.40
(1.00)
MIN.
NOM.
5.08 (0.200)
4.57 (0.180)
13.55 (0.533)
13.35 (0.525)
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
1.32 (0.052)
1.02 (0.040)
6.10 (0.240)
5.46 (0.215)
1.27
(0.050)
NOM.
2.54
(0.100)
0.45
(0.018)
SQ. NOM.
CATHODE
LEAD
25.40
(1.00)
MIN.
NOM.
5.08 (0.200)
4.57 (0.180)
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
0.65 (0.026) MAX.
1.00 (0.040) MAX. EPOXY MENISCUS
1.00 (0.040) MAX. EPOXY MENISCUS
Package Dimensions
HLMP-Cx27
HLMP-Cx25
HLMP-C610
HLMP-Cx08
Notes:
1. All dimension are in mm (inches).
2. For PCB hole recommendations, see the Precautions section.
3
Part Numbering System
HLMP - C x xx - x x x xx
Mechanical Option
00:Bulk
02: Tape & Reel, Straight Leads
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle & Stando Option
08: 8 degrees, without stando
10: 8 degrees, with stando
25: 25 degrees, without stando
27: 25 degrees, with stando
Color Options
0: AlInGaP Red 626 nm
2: AlInGaP Amber 590 nm
3: AlInGaP Orange 605 nm
6: AlInGaP Red 635 nm
Absolute Maximum Ratings at T
A
= 25 °C
Parameter Absolute Maximum Units
Peak Forward Current 70 mA
Average Forward Current
[1]
30 mA
DC Current
[2]
50 mA
Reverse Voltage (I
R
= 100 μA)
5 V
LED Junction Temperature
110
°C
Operating Temperature Range -40 to +100
°C
Storage Temperature Range -40 to +100
°C
Notes:
1.
See Figure 2 to establish pulsed operating conditions.
2. Derate linearly from 50 °C at 0.5 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended to operate this device at peak currents above the Absolute Maximum Peak Forward Current.
P1-P3P4-P6P7-P9P10-P11

HLMP-C008-U0000

Mfr. #:
Buy HLMP-C008-U0000
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - Through Hole Red Water Clear 626nm 6000mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet