• Write bytes and extended quad input fast write bytes of the entire memory using
a single operation code
• In-system programming (ISP) support with the SRunner software driver
• ISP support with Intel FPGA Download Cable II, Intel FPGA Download Cable,
Ethernet Download Cable II, or Ethernet Download Cable download cables
•
By default, the memory array is erased and the bits are set to 1
• During user mode, you can use the Intel FPGA ASMI Parallel or Intel FPGA ASMI
Parallel II IP cores to access the EPCQ-L device
• More than 20 years data retention
Warning: EPCQ-L devices are only compatible with the Intel Stratix 10, Intel Arria 10, and Intel
Cyclone 10 GX devices.
Operating Conditions
This section covers information about the absolute maximum ratings, recommended
operating conditions, DC operating conditions, ICC supply current, and capacitance for
EPCQ-L devices.
Absolute Maximum Ratings
Table 2. Absolute Maximum Ratings
Symbol Parameter Condition Min Max Unit
V
CC
Supply voltage With respect to
GND
–0.6 2.4 V
V
IO
(3)
DC input/output
voltage
With respect to
GND
–0.6 V
CC
+ 0.6 V
T
STG
Storage
temperature
No bias –65 150 ºC
Recommended Operating Conditions
Table 3. Recommended Operating Conditions
Symbol Parameter Condition Min Max Unit
V
CC
Supply voltage
(4)
1.7 2.0 V
V
I
Input voltage With respect to GND –0.5 0.4 + V
CC
V
continued...
(3)
For periods of less than 10 ns, V
IL
can undershoot to –1.0 V and V
IH
can overshoot to V
CC
+ 1.0 V.
(4)
The maximum V
CC
rise time is 100 ms.
EPCQ-L Serial Configuration Devices Datasheet
CF52013 | 2018.05.18
EPCQ-L Serial Configuration Devices Datasheet
4
