High Common-Mode Voltage,
Single-Supply Difference Amplifier
Data Sheet
AD8203
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©20042013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
High common-mode voltage range
−6 V to +30 V at a 5 V supply voltage
Operating temperature range: −40°C to +125°C
Supply voltage range: 3.5 V to 12 V
Low-pass filter (1-pole or 2-pole)
Excellent ac and dc performance
±1 mV voltage offset (8-lead SOIC)
±1 ppm/°C typical gain drift
80 dB CMRR minimum dc to 10 kHz
APPLICATIONS
Transmission control
Diesel injection control
Engine management
Adaptive suspension control
Vehicle dynamics control
GENERAL DESCRIPTION
The AD8203 is a single-supply difference amplifier for amplify-
ing and low-pass filtering small differential voltages in the
presence of a large common-mode voltage (CMV). The input
CMV range extends from −6 V to +30 V at a typical supply
voltage of 5 V.
The AD8203 is available in packaged form. The MSOP and
SOIC packages are specified over a wide temperature range,
from −40°C to +125°C, making the AD8203 well-suited for use
in many automotive platforms.
Automotive platforms demand precision components for better
system control. The AD8203 provides excellent ac and dc
performance keeping errors to a minimum in the user’s system.
Typical offset and gain drift in the SOIC package are 0.3 µV/°C and
1 ppm/°C, respectively. Typical offset and gain drift in the MSOP
package are 2 μV/°C and 1 ppm/°C, respectively. The device also
delivers a minimum CMRR of 80 dB from dc to 10 kHz.
The AD8203 features an externally accessible 100 kΩ resistor at
the output of the Preamp A1, which can be used for low-pass
filter applications and for establishing gains other than 14.
FUNCTIONAL BLOCK DIAGRAMS
A1
+IN
–IN
200k200k
100k
A2
+IN
–IN
G = ×7
G = ×2
AD8203
10k
10k
+IN
–IN
GND
OUT
NC A1
A2
+V
S
NC = NO CONNECT
2
5
746
8
1
3
05013-001
Figure 1. Functional Block Diagram
GND
NC
–IN
+IN
A1
+V
S
A2
OUT
AD8203
5V
OUTPUT
INDUCTIVE
LOAD
POWER
DEVICE
4-TERM
SHUNT
CLAMP
DIODE
BATTERY
14V
COMMON
NC = NO CONNECT
05013-002
Figure 2. High Line Current Sensor
GND
NC
–IN
+IN
A1
+V
S
A2
OUT
AD8203
5V
OUTPUT
INDUCTIVE
LOAD
POWER
DEVICE
4-TERM
SHUNT
CLAMP
DIODE
BATTERY
14V
COMMON
NC = NO CONNECT
05013-003
Figure 3. Low Line Current Sensor
AD8203* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
DESIGN RESOURCES
AD8203 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all AD8203 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
AD8203 Data Sheet
Rev. D | Page 2 of 20
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
Functional Block Diagrams ............................................................. 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Single Supply ................................................................................. 3
Absolute Maximum Ratings ............................................................ 4
ESD Caution .................................................................................. 4
Pin Configuration and Function Descriptions ............................. 5
Typical Performance Characteristics ............................................. 6
Theory of Operation ...................................................................... 12
Applications ..................................................................................... 14
Current Sensing .......................................................................... 14
Gain Adjustment ........................................................................ 14
Gain Trim .................................................................................... 15
Low-Pass Filtering ...................................................................... 15
High Line Current Sensing with LPF and Gain Adjustment 16
Driving Charge Redistribution ADCs ..................................... 16
Outline Dimensions ....................................................................... 17
Ordering Guide .......................................................................... 17
REVISION HISTORY
4/13Rev. C to Rev. D
Changes to Initial System Gain Parameter .................................... 3
2/13—Rev. B to Rev. C
Changes to Features Section and General Description Section ........ 1
Changes to Table 1 ............................................................................ 3
Updated Outline Dimensions ....................................................... 17
Changes to Ordering Guide .......................................................... 17
10/05Rev. A to Rev. B
Added SOIC Package ......................................................... Universal
Replaced Figure 23 ........................................................................... 8
Added Figure 24 to Figure 29.......................................................... 9
Changes to Theory of Operation Section ................................... 12
Added Figure 41 .............................................................................. 12
Updated Outline Dimensions ....................................................... 17
Changes to Ordering Guide .......................................................... 17
2/05Rev. 0 to Rev. A
Changes to Specifications Table ...................................................... 3
Changes to Caption on Figure 6 and Figure 8 ............................... 6
Changes to Figure 12 ......................................................................... 7
Added Figure 14 to Figure 23 .......................................................... 7
Changes to Figure 26 and Figure 27 ............................................ 10
Changes to Figure 29 ...................................................................... 11
Changes to Figure 32 and Figure 33 ............................................ 12
Changes to Ordering Guide .......................................................... 13
10/04R
evision 0: Initial Version

AD8203YRMZ

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Current Sense Amplifiers High Common-Mode VTG SGL-Supply
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union