OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AFCT-5964NLZ

P1-P3P4-P6P7-P9P10-P12P13-P15
13
Transmitter Electrical Characteristics
AFCT-5964TLZ/TGZ: T
A
= 0° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964NLZ/NGZ: T
A
= -5° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964ATLZ/ATGZ: T
A
= -40° C to +85° C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CCT
57 140 mA
Power Dissipation P
DIST
0.5
Data Input Voltage Swing (single-ended) V
IH
- V
IL
250 930 mV
Transmitter Di erential
Data Input Current – Low
I
IL
-350
A
Transmitter Di erential
Data Input Current – High
I
IH
350
A
Laser Diode Bias Monitor Voltage 700 mV 1
Power Monitor Voltage 10 200 mV 1
Receiver Electrical Characteristics
AFCT-5964TLZ/TGZ: T
A
= 0° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964NLZ/NGZ: T
A
= -5° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964ATLZ/ATGZ: T
A
= -40° C to +85° C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CCR
95 140 mA 2
Power Dissipation P
DISR
0.5
Data Output Voltage Swing (single-ended) V
OH
- V
OL
575 930 mV 3
Data Output Rise Time t
r
2.2 ns 4
Data Output Fall Time t
f
2.2 ns 4
Signal Detect Output Voltage – Low 0.6 V
Signal Detect Output Voltage – High 2.2 V
Signal Detect Assert Time (OFF to ON) AS
MAX
100
s
Signal Detect Deassert Time (ON to OFF) ANS
MAX
2.3 100
s
Notes:
1. The laser bias monitor current and laser diode optical power are calculated as ratios of the corresponding voltages to their current sensing resistors,
10and 200 (under modulation). Laser bias monitor voltage will be a minimum at low temperatures, refer to characterization report.
2. Includes current for biasing Rx data outputs.
3. These outputs are compatible with low voltage PECL inputs.
4. These are 20-80% values.
14
Transmitter Optical Characteristics
AFCT-5964TLZ/TGZ: T
A
= 0° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964ATLZ/ATGZ: T
A
= -40° C to +85° C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Output Optical Power 9 m SMF
P
OUT
-15 -8 dBm 1
Center Wavelength
C
1261 1360 nm
Spectral Width – rms
7.7 nm rms 2
Optical Rise Time t
r
2ns3
Optical Fall Time t
f
2ns3
Extinction Ratio E
R
8.2 dB
Output Optical Eye Compliant with eye mask Telcordia GR-253 CORE and ITU-T G.957
Receiver Optical Characteristics
AFCT-5964TLZ/TGZ: T
A
= 0° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964NLZ/NGZ: T
A
= -5° C to +70° C, V
CC
= 3.1 V to 3.5 V)
AFCT-5964ATLZ/ATGZ: T
A
= -40° C to +85° C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Receiver Sensitivity P
IN
MIN -38 -34 dBm avg. 4
Receiver Overload P
IN
MAX -8 0 dBm avg. 4
Input Operating Wavelength
1261 1580 nm
Signal Detect – Asserted P
A
-40.3 -34 dBm avg.
Signal Detect – Deasserted P
D
-45 -42.2 dBm avg.
Signal Detect – Hysteresis P
A
- P
D
0.5 1.89 4 dB
Notes:
1. The output power is coupled into a 1 m single-mode  ber. Minimum output optical level is at end of life.
2. The relationship between FWHM and RMS values for spectral width can be derived from the assumption of a Gaussian shaped spectrum which
results in RMS = FWHM/2.35.
3. These are un ltered 10-90% values.
4. P
IN
represents the typical optical input sensitivity of the receiver. Sensitivity (P
IN
MIN) and saturation (P
IN
MAX) levels for a 2
23
-1 PRBS with 72 ones and
72 zeros inserted. Over the range the receiver is guaranteed to provide output data with a Bit Error Rate better than or equal to 1 x 10
-10
.
Transmitter Optical Characteristics
AFCT-5964NLZ/NGZ: T
A
= -5° C to +70° C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Output Optical Power 9 m SMF
P
OUT
-5 0 dBm 1
Center Wavelength
C
1270 1360 nm
Spectral Width – rms
3 nm rms 2
Optical Rise Time t
r
2ns3
Optical Fall Time t
f
2ns3
Extinction Ratio E
R
10 dB
Output Optical Eye Compliant with eye mask Telcordia GR-253-CORE and ITU-T G.957
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-3343EN - January 12, 2012
Ordering Information
1300 nm FP Laser (Temperature range 0° C to +70° C)
AFCT-5964TLZ = 2 x 10 LC connector, IR, +3.3 V TTL SD with EMI nose shield
AFCT-5964TGZ = 2 x 10 LC connector, IR, +3.3 V TTL SD without EMI nose shield
1300 nm FP Laser (Temperature range -5° C to +70° C)
AFCT-5964NLZ = 2 x 10 LC connector. LR, +3.3 V TTL SD with EMI nose shield
AFCT-5964NGZ = 2 x 10 LC connector. LR, +3.3 V TTL SD without EMI nose shield
1300 nm FP Laser (Temperature range -40° C to +85° C)
AFCT-5964ATLZ = 2 x 10 LC connector. IR, +3.3 V TTL SD with EMI nose shield
AFCT-5964ATGZ = 2 x 10 LC connector, IR, +3.3 V TTL SD without EMI nose shield
Related Products
Other single mode OC-3 transceivers in this product family are:-
AFCT-5961TLZ/TGZ/NLZ/NGZ/ATLZ/ATGZ = 2 x 5 LC connector. LR/IR, LVPECL SD
AFCT-5962TLZ/TGZ/NLZ/NGZ/ATLZ/ATGZ = 2 x 10 LC connector. LR/IR, LVPECL SD
AFCT-5963TLZ/TGZ/NLZ/NGZ/ATLZ/ATGZ = 2 x 5 LC connector, LR/IR, +3.3 V TTL SD
Class 1 Laser Product: This product conforms to the
applicable requirements of 21 CFR 1040 at the date of
manufacture
Date of Manufacture:
Avago Technologies Inc., No 1 Yishun Ave 7, Singapore
Handling Precautions
1. The AFCT-5964TLZ/TGZ/ATLZ/ATGZ/NLZ/NGZ can be
damaged by current surges or overvoltage. Power
supply transient precautions should be taken.
2. Normal handling precautions for electrostatic sensitive
devices should be taken.
P1-P3P4-P6P7-P9P10-P12P13-P15

AFCT-5964NLZ

Mfr. #:
Buy AFCT-5964NLZ
Manufacturer:
Description:
Fiber Optic Transmitters, Receivers, Transceivers Transceive
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet