OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

STA2058

P1-P3P4-P6P7-P9P10-P12P13-P14
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
September 2013 Doc ID 14095 Rev 4 1/14
1
STA8058
TESEO™
high performance GPS multichip module (MCM)
Data brief production data
Features
■ GPS multichip module:
– STA2058 TESEO Baseband
– STA5620 RF Front-end
■ Complete embedded memory system:
– Flash 256 KB + 16 Kbytes
– RAM 64 Kbytes.
■ 66-MHz ARM7TDMI 32 bit processor
■ High performance GPS engine (HPGPS)
■ SBAS (WAAS and EGNOS) supported
■ Sensitivity (-146 dBm acquisition, -159 dBm
tracking)
■ Time to first fix (1 s reacquisition, 2.5 s hot start,
34 s warm start, 39 s cold start)
■ Accuracy (2 m autonomous)
■ Extensive GPS receiver interfaces: 32 GPIOs,
4 UARTs, 2 SPIs, 2 I2Cs, 1 CAN 2.0,
1 USB 1.1, 1 HDLC and 4 channels ADC
■ Compatible with L1 signal (C/A code)
■ ST proprietary technology
– CMOS Flash embebbed technology for
STA2058
– BiCMOS Sige technology for STA5620
■ LFBGA104 lead-free package
■ -40 °C to 85 °C operating temperature range
■ Evaluation kits:
– STA8058 module reference designs
(17x19 mm and 25x25 mm)
– Evaluation board hosting STA8058 module
Description
STA8058 TESEO MCM is a fully embedded GPS
engine integrating STA2058 TESEO baseband.
and STA5620 RF front-end. The embedded Flash
memory enables the equipment manufacturer to
load the entire GPS software (including tracking,
acquisition, navigation and data output) after
customising its interfaces to his needs.
A standard GPS library is available from ST. By
combining the ARM7TDMI microcontroller core
with on-chip Flash/RAM, 16-channel GPS
correlator DSP, RF Front-end and an extensive
range of interfaces on single package solution,
the STA8058 provides a highly-flexible and cost-
effective solution for GPS applications.
LFBGA104 (7x11x1.4 mm)
Table 1. Device summary
Order code Package Packing Automotive grade CAN
STA8058 LFBGA104 (7 x 11 x 1.4 mm) Tray No No
STA8058TR LFBGA104 (7 x 11 x 1.4 mm) Tape and reel No No
STA8058A LFBGA104 (7 x 11 x 1.4 mm) Tray Yes Yes
STA8058ATR LFBGA104 (7 x 11 x 1.4 mm) Tape and reel Yes Yes
www.st.com
Contents STA8058
2/14 Doc ID 14095 Rev 4
Contents
1 Features summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Logic symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 System block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 LFBGA104 ball out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4 Power supply pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
STA8058 Features summary
Doc ID 14095 Rev 4 3/14
1 Features summary
● ARM7TDMI 16/32 bit RISC CPU based host microcontroller running at a frequency up
to 66 MHz.
● Complete Embedded Memory System:
– Flash 256 Kbytes + 16 Kbytes (100 KB erasing/programming cycles)
– RAM 64 Kbytes.
● 16 channel High performance GPS correlation DSP.
● ST propietary technology:
– CMOS Flash embedded technology for baseband
– BiCMOS Sige for radio front-end
● SBAS (WAAS and EGNOS) supported.
● -40 °C to 85 °C operating temperature range.
● 104-pin LFBGA104 package.
● Power supply:
– 3.0 V to 3.6 V operating supply range for input/output periphery
– 3.0 V to 3.6 V operating supply range for A/D converter reference
– 1.8 V operating supply range for core supply provided by internal voltage regulator
with external stabilization capacitor or by external supply voltage
– 2.4 V to 3 V operating supply range for RF front-end section
● Reset and clock control unit able to provide low power modes (WAIT, SLOW, STOP,
Standby) and to generate the internal clock from the external reference through
integrated PLL.
● 32 programmable general purpose I/O, each pin programmable independently as
digital input or digital output; 30 are multiplexed with peripheral functions; 16 can
generate an interrupt on input level/transition.
● Real time clock module with 32 kHz low power oscillator and separate power supply to
continue running during stand-by mode.
● 16-bit Watchdog timer with 8 bits prescaler for system reliability and integrity.
● One CAN module compliant with the CAN specification V2.0 part B (active) and bit rate
can be programmed up to 1 MBaud.
● Four 16-bit programmable timers with 7 bit prescaler, up to two input capture/output
compare, one pulse counter function, one PWM channel with selectable frequency
each.
● 4 channels 12-bit sigma-delta analog to digital converter, single channel or multi
channel conversion modes, single-shot or continuous conversion modes, sample rate
1 kHz, conversion range 0-2.5V .
● Three serial communication interfaces (UART) allow full duplex, asynchronous,
communications with external devices, independently programmable TX and RX baud
rates up to 625K baud.
● One UART adapted to suit smart card interface needs, for asynchronous SC as defined
by ISO 7816-3. It includes SC clock generation.
● Two serial peripheral interfaces (SPI) allow full duplex, synchronous communications
with external devices, master or slave operation, max baud rate of 5.5Mb/s. One SPI
may be used as multimedia card interface.
P1-P3P4-P6P7-P9P10-P12P13-P14

STA2058

Mfr. #:
Buy STA2058
Manufacturer:
STMicroelectronics
Description:
RF Microcontrollers - MCU High Perf SOC GPS TESEO baseband
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet