NX5DV330_3 © NXP B.V. 2009. All rights reserved.
Product data sheet Rev. 03 — 5 August 2009 4 of 15
NXP Semiconductors
NX5DV330
Quad 1-of-2 video multiplexer/demultiplexer
6. Functional description
7. Limiting values
[1] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
[2] For SO16 package: P
tot
derates linearly with 8 mW/K above 70 °C.
[3] For SSOP16 (QSOP16) and TSSOP16 packages: P
tot
derates linearly with 5.5 mW/K above 60 °C.
[4] For DHVQFN16 packages: above 60 °C derate linearly with 4.5 mW/K.
8. Recommended operating conditions
Table 3. Function selection
H = HIGH voltage level; L = LOW voltage level; X = Don’t care.
Input Switch
E S
L L Y0 to Z or Z to Y0
L H Y1 to Z or Z to Y1
H X switch off
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage −0.5 +7.0 V
V
I
input voltage
[1]
−0.5 +7.0 V
I
SW
switch current continuous current
through each switch
- 128 mA
I
IK
input clamping current V
I
<0V - −50 mA
T
stg
storage temperature −65 +150 °C
P
tot
total power dissipation
[2][3][4]
- 500 mW
Table 5. Operating conditions
All unused control inputs of the device must be held at V
CC
or GND to ensure proper device operation.
Symbol Parameter Conditions Min Typ Max Unit
V
CC
supply voltage 4.0 5.0 5.5 V
V
IH
HIGH-level input voltage 2.0 - - V
V
IL
LOW-level input voltage - - 0.8 V
V
H
hysteresis voltage pin S, E - 45 - mV
T
amb
ambient temperature operating in free-air −40 +25 +85 °C