650R-12LFT

ICS650-12
MPEG CLOCK SYNTHESIZER CLOCK SYNTHESIZER
IDT™ / ICS™
MPEG CLOCK SYNTHESIZER 4
ICS650-12 REV E 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS650-12. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V or 5 V, Ambient Temperature 0 to +70° C
Item Conditions Rating
Supply Voltage, VDD Referenced to GND 7 V
All Inputs and Outputs Referenced to GND -0.5 V to VDD+0.5 V
Ambient Operating Temperature 0 to +70° C
Storage Temperature -65 to +150° C
Soldering Temperature Max. of 10 seconds 260° C
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.0 5.5 V
Input High Voltage V
IH
2 VDD/2 V
Input Low Voltage V
IL
VDD/2 0.8 V
Output High Voltage V
OH
VDD = 3.3 V, I
OH
= -8 mA 2.4 V
Output Low Voltage V
OL
VDD = 3.3 V, I
OL
= 8 mA 0.8 V
Output High Voltage V
OH,
VDD = 3.3
or 5 V
I
OH
= -8 mA VDD-0.4 V
Operating Supply Current I
DD
@5 V No Load 39 mA
Operating Supply Current I
DD
@5 V No Load 22 mA
Short Circuit Current I
OS,
VDD = 3.3 V Each output ±50 mA
Input Capacitance Except X1 7 pF
ICS650-12
MPEG CLOCK SYNTHESIZER CLOCK SYNTHESIZER
IDT™ / ICS™
MPEG CLOCK SYNTHESIZER 5
ICS650-12 REV E 051310
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V or 5 V, Ambient Temperature 0 to +70° C
External Components
A minimum number of external components are required for proper operation. A decoupling capacitor of 0.01 µF
should be connected between VDD and GND on pins 4 and 6, 16 and 14, and a 33 terminating resistor may be
used on each clock output if the trace is longer than 1 inch.
Parameter Symbol Conditions Min. Typ. Max. Units
Input Crystal or Clock Frequency 27 MHz
Output Clocks Accuracy (synthesis error) All clocks 0 1 ppm
Output Clock Rise Time t
OR
0.8 to 2.0 V 1.5 ns
Output Clock Fall Time t
OF
2.0 to 0.8 V 1.5 ns
Output Clock Duty Cycle At VDD/2 40 50 60 %
One Sigma Jitter, ACLK VDD = 3.3 V 100 ps
VDD = 5.0 V 40 ps
Absolute Clock Period Jitter VDD = 3.3 V, except
CCLK = 20 MHz
±300 ps
VDD = 5.0 V, except
CCLK = 20 MHz
±200 ps
ICS650-12
MPEG CLOCK SYNTHESIZER CLOCK SYNTHESIZER
IDT™ / ICS™
MPEG CLOCK SYNTHESIZER 6
ICS650-12 REV E 051310
Package Outline and Package Dimensions (20-pin SSOP)
Package dimensions are kept current with JEDEC Publication No. 95
Ordering Information
"LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes
no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No
other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications
such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not
recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT
does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
650R-12LF 650R-12LF Tubes 20-pin SSOP 0 to +70° C
650R-12LFT 650R-12LF Tape and Reel 20-pin SSOP 0 to +70° C
INDEX
AREA
1 2
20
D
E1
E
SEATING
PLANE
A1
A
e
- C -
b
.10 (.004)
C
c
L
Millimeters Inches
Symbol Min Max Min Max
A 1.35 1.75 0.053 0.069
A1 0.10 0.25 0.004 0.010
b 0.20 0.30 0.008 0.012
c 0.18 0.25 0.007 0.010
D 8.55 8.75 0.337 0.344
E 5.80 6.20 0.228 0.244
E1 3.80 4.00 0.150 0.157
e 0.635 Basic 0.025 Basic
L 0.40 1.27 0.016 0.050
α 0° 8° 0° 8°

650R-12LFT

Mfr. #:
Manufacturer:
IDT
Description:
Clock Synthesizer / Jitter Cleaner SYSTEM PERIPHERAL CLOCK SOURCE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet