14 GHz to 30 GHz, GaAs, MMIC,
Data Sheet
Rev. A Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2017–2018 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Passive: no dc bias required
Conversion loss: 9 dB typical
Input IP3: 19 dBm typical
LO to RF isolation: 48 dB typical
Wide IF frequency range: dc to 8 GHz
12-terminal, 3 mm × 3 mm, RoHS compliant LCC package
APPLICATIONS
Microwave and very small aperture terminal (VSAT) radios
Test equipment
Point to point radios
Military electronic warfare (EW); electronic countermeasure
(ECM); and command, control, communications and
intelligence (C3I)
FUNCTIONAL BLOCK DIAGRAM
1
GND
7
GND
8
RF
9
GND
10
NIC
11
NIC
12
NIC
4
GND
2
LO
3
GND
5
IF
6
GND
PACKAGE
BASE
GND
HMC292ALC3B
13886-001
Figure 1.
GENERAL DESCRIPTION
The HMC292ALC3B is a general-purpose, double balanced,
monolithic microwave integrated circuit (MMIC), mixer housed in
a leadless Pb-free, RoHS compliant LCC package, that can be
used as an upconverter or downconverter in the 14 GHz to 30
GHz frequency range. The HMC292ALC3B is ideally suited for
applications where small size, no dc bias, and consistent IC
performance are required. This mixer can operate over a wide
local oscillator (LO) drive level of 9 dBm to 15 dBm. It performs
equally well as a biphase modulator or demodulator. The
HMC292ALC3B eliminates the need for wire bonding, allowing
use of surface-mount manufacturing techniques.