IRLR/U9343PbF & IRLU9343-701PbF
10 www.irf.com
Data and specifications subject to change without notice.
This product has been designed for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.12/04
Repetitive rating; pulse width limited by
max. junction temperature.
Starting T
J
= 25°C, L = 1.24mH,
R
G
= 25Ω, I
AS
= -14A.
Pulse width ≤ 400µs; duty cycle ≤ 2%.
This only applies for I-Pak, L
S
of D-Pak is
measured between lead and center of die contact
R
θ
is measured at T
J
of approximately 90°C.
Notes:
Contact factory for mounting information
Limited by Tjmax. See Figs. 14, 15, 17a, 17b for repetitive avalanche information
When D-Pak mounted on 1" square PCB (FR-4 or G-10 Material) .
For recommended footprint and soldering techniques refer to
application note #AN-994
Refer to D-Pak package for Part Marking, Tape and Reel information.
I-Pak Leadform Option 701 Package Outline
Dimensions are shown in millimeters (inches)
