CHY100D Datasheet CHY100D-TL, CHY100D | P4-P6

Rev. C 03/14

CHY100

www.powerint.com

Parameter Symbol

Conditions

SOURCE = 0 V; T

= -20 °C to +85 °C

(Unless Otherwise Speciﬁed)

Min Typ Max Units

Supply, Reference and Protection Functions

BYPASS Pin Voltage V

4 5 6

Power-Up Reset

Threshold Voltage

BP(RESET)

2.0 3.9 V

BYPASS Pin

Source Current

BPSC

= 4.3 V, T

= 25 °C

N1 = N2 = N3 = Off

135 µA

BYPASS Pin

Shunt Voltage

BP(SHUNT)

= 3 mA 5.7 6 6.3 V

REFERENCE Pin

Voltage

1.18 1.23 1.28 V

HVDCP Functions

Data Detect Voltage V

DAT(REF)

0.25 0.325 0.4 V

Output Voltage

Selection Reference

SEL(REF)

1.8 2 2.2 V

12 V / 20 V Output

Inhibit Threshold

INH

-0.6 V

Data Lines

Short-Circuit Delay

DAT(SHORT)

OUT

≥ 0.8 V

See Figure 5

10 20 ms

High Glitch

Filter Time

GLITCH(BC)

DONE

1000 1250 1500 ms

Output Voltage

Glitch Filter Time

GLITCH(V)

CHANGE

20 40 60 ms

D- Pull-Down

Resistance

DM(DWN)

14.25 19.53 24.5 kΩ

Switch N1

On-Resistance

DS(ON)N1

= 200 µA 300

Ω

Switch N2

On-Resistance

DS(ON)N2

= 200 µA 300

Ω

Switch N3

On-Resistance

DS(ON)N3

= 200 µA 300

Ω

Switch N4

On-Resistance

DS(ON)N4

= 200 µA 300

Ω

Switch N5

On-Resistance

DS(ON)N5

= 200 µA, V

(D+)

≤ 3.6 V 20 40

Ω

Data Line Capacitance C

DCP(PWR)

See Note A 1 nF

Absolute Maximum Ratings

BYPASS Pin Voltage ............................................... -0.3 to 9 V

REFERENCE Pin Voltage .......................................... -0.3 to 9 V

V1/V2/V3 Pin Voltage ............................................... -0.3 to 9 V

/D- Pin Voltage …….. ........................................... -0.3 to 5 V

BYPASS Pin Current ...................................................... 25 mA

V1/V2/V3 Pin Current

.................................................... 0.5 mA

/D- Pin Current …………………. .................................... 1 mA

Operating Junction Temperature .................... -40 °C to +150 °C

Operating Ambient Temperature ..................... -40 °C to 105 °C

Storage Temperature ...................................... -65 °C to 150 °C

Lead Temperature

(1)

.........................................................260 °C

Notes:

1. 1/16 in. from case for 5 seconds.

NOTES:

A. Guaranteed by design. Not tested in production.

Rev. C 03/14

CHY100

www.powerint.com

PI-5615-041210

D08A

SO-8 (D Package)

3.90 (0.154) BSC

Notes:

1. JEDEC reference: MS-012.

2. Package outline exclusive of mold flash and metal burr.

3. Package outline inclusive of plating thickness.

4. Datums A and B to be determined at datum plane H.

5. Controlling dimensions are in millimeters. Inch dimensions

are shown in parenthesis. Angles in degrees.

0.20 (0.008)

6.00 (0.236) BSC

4.90 (0.193) BSC

0.10 (0.004)

A-B

1.27 (0.050) BSC

7X 0.31 - 0.51 (0.012 - 0.020)

0.25 (0.010)

C A-B D

0.25 (0.010)

0.10 (0.004)

(0.049 - 0.065)

1.25 - 1.65

1.75 (0.069)

1.35 (0.053)

0.10 (0.004)

1.27 (0.050)

0.40 (0.016)

GAUGE

PLANE

0 - 8

1.04 (0.041) REF

0.25 (0.010)

BSC

SEATING

PLANE

0.25 (0.010)

0.17 (0.007)

DETAIL A

SEATING PLANE

Pin 1 ID

5.45 (0.215)

1.27 (0.050)

0.60 (0.024)

1.45 (0.057)

Reference

Solder Pad

Dimensions

4.00 (0.157)

Part Ordering Information

• ChiPhy Product Family

• 100 Series Number

• Package Identiﬁer

D SO-8

CHY 100 D

For the latest updates, visit our website: www.powerint.com

Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power

Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES

NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.

Patent Information

The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered

by one or more U.S. and foreign patents, or potentially by pending U.S. and foreign patent applications assigned to Power Integrations. A

complete list of Power Integrations patents may be found at www.powerint.com. Power Integrations grants its customers a license under

certain patent rights as set forth at http://www.powerint.com/ip.htm.

Life Support Policy

POWER INTEGRATIONS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR

SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF POWER INTEGRATIONS. As used herein:

1. A Life support device or system is one which, (i) is intended for surgical implant into the body, or (ii) supports or sustains life, and (iii)

whose failure to perform, when properly used in accordance with instructions for use, can be reasonably expected to result in signiﬁcant

injury or death to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause

the failure of the life support device or system, or to affect its safety or effectiveness.

The PI logo, TOPSwitch, TinySwitch, LinkSwitch, LYTSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS,

HiperLCS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, StakFET, PI Expert and PI FACTS are trademarks of Power Integrations, Inc.

Power Integrations Worldwide Sales Support Locations

World Headquarters

5245 Hellyer Avenue

San Jose, CA 95138, USA.

Main: +1-408-414-9200

Customer Service:

Phone: +1-408-414-9665

Fax: +1-408-414-9765

e-mail: usasales@powerint.com

China (Shanghai)

Rm 2410, Charity Plaza, No. 88

North Caoxi Road

Shanghai, PRC 200030

Phone: +86-21-6354-6323

Fax: +86-21-6354-6325

e-mail: chinasales@powerint.com

China (ShenZhen)

3rd Floor, Block A,

Zhongtou International Business

Center, No. 1061, Xiang Mei Rd,

FuTian District, ShenZhen,

China, 518040

Phone: +86-755-8379-3243

Fax: +86-755-8379-5828

e-mail: chinasales@powerint.com

Germany

Lindwurmstrasse 114

80337 Munich

Germany

Phone: +49-895-527-39110

Fax: +49-895-527-39200

e-mail: eurosales@powerint.com

India

#1, 14th Main Road

Vasanthanagar

Bangalore-560052 India

Phone: +91-80-4113-8020

Fax: +91-80-4113-8023

e-mail: indiasales@powerint.com

Italy

Via Milanese 20, 3rd. Fl.

20099 Sesto San Giovanni (MI)

Italy

Phone: +39-024-550-8701

Fax: +39-028-928-6009

e-mail: eurosales@powerint.com

Japan

Kosei Dai-3 Bldg.

2-12-11, Shin-Yokohama,

Kohoku-ku

Yokohama-shi Kanagwan

222-0033 Japan

Phone: +81-45-471-1021

Fax: +81-45-471-3717

e-mail: japansales@powerint.com

Korea

RM 602, 6FL

Korea City Air Terminal B/D, 159-6

Samsung-Dong, Kangnam-Gu,

Seoul, 135-728, Korea

Phone: +82-2-2016-6610

Fax: +82-2-2016-6630

e-mail: koreasales@powerint.com

Singapore

51 Newton Road

#19-01/05 Goldhill Plaza

Singapore, 308900

Phone: +65-6358-2160

Fax: +65-6358-2015

e-mail: singaporesales@powerint.com

Taiwan

5F, No. 318, Nei Hu Rd., Sec. 1

Nei Hu Dist.

Taipei 11493, Taiwan R.O.C.

Phone: +886-2-2659-4570

Fax: +886-2-2659-4550

e-mail: taiwansales@powerint.com

Europe HQ

1st Floor, St. James’s House

East Street, Farnham

Surrey GU9 7TJ

United Kingdom

Phone: +44 (0) 1252-730-141

Fax: +44 (0) 1252-727-689

e-mail: eurosales@powerint.com

Applications Hotline

World Wide +1-408-414-9660

Applications Fax

World Wide +1-408-414-9760

Revision Notes Date

A Initial Release. 07/13

B Extended Ambient Temperature to -40 °C. 01/14

C Added Note for Class A Charger on page 3. 03/14

P1-P3 P4-P6

CHY100D

Mfr. #:

Buy CHY100D

Manufacturer:

Power Integrations

Description:

Battery Management Charger Interface QC 2.0

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

CHY100D

CHY100D

Products related to this Datasheet