8
EPCOS AG
Please read the important notes, cautions and warnings.
PAPR leads ( Protection Against Polarity Reversal )
Specifications and characteristics in brief Product
d x l B C D E a b
16 x 20 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.05
16 x 25 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.05
16 x 31.5 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.05
18 x 20 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.1
18 x 25 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.1
18 x 31.5 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.1
18 x 35 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.1
18 x 40 1.5 3.0 1.3 0.3 7.5 0.8 ± 0.1
20 x 20 1.5 3.0 1.3 0.3 10.0 0.8 ± 0.1
20 x 25 1.5 3.0 1.3 0.3 10.0 0.8 ± 0.1
20 x 40 1.5 3.0 1.3 0.3 10.0 0.8 ± 0.1
Crimped leads Dimensions (mm)
View A
E ±0.1
ø1.5ø1.0
KAL0810-6-E
Suggestion for PCB hole diameter,
wire ø0.8 mm
D±0.1
Safety vent
C±0.2
-
max.
A
+
B±0.2
KAL0809-3-E
d max.
d
a±0.5
b
marking
Minus pole
These lead configurations ensure correct placement of the capacitors on the PCB with regard to polarity.
PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available:
■ Crimped leads
■ J leads
■ Bent 90° leads
Specifications and characteristics in brief Product
d x l B E J a b
10 x 12.5 3.2 0.7 1.2 5.0 0.6 ± 0.05
10 x 16 3.2 0.7 1.2 5.0 0.6 ± 0.05
10 x 20 3.2 0.7 1.2 5.0 0.6 ± 0.05
12.5 x 20 3.2 0.7 1.2 5.0 0.6 ± 0.05
12.5 x 25 3.2 0.7 1.2 5.0 0.6 ± 0.05
16 x 20 3.5 0.7 1.6 7.5 0.8 ± 0.05
16 x 25 3.5 0.7 1.6 7.5 0.8 ± 0.05
16 x 31.5 3.5 0.7 1.6 7.5 0.8 ± 0.05
18 x 20 3.5 0.7 1.6 7.5 0.8 ± 0.1
18 x 25 3.5 0.7 1.6 7.5 0.8 ± 0.1
18 x 31.5 3.5 0.7 1.6 7.5 0.8 ± 0.1
18 x 35 3.5 0.7 1.6 7.5 0.8 ± 0.1
J leads Dimensions (mm)
KAL0979-P-E
Safety vent
a±0.5
Minus pole
marking
øb
J±0.2
E±0.5
B±0.5
-
+
max.
d max.
d
Specifications and characteristics in brief Product
d x l C E F a b
16 x 20 4.0 4.0 12.0 7.5 0.8 ± 0.05
16 x 25 4.0 4.0 12.0 7.5 0.8 ± 0.05
16 x 31.5 4.0 4.0 12.0 7.5 0.8 ± 0.05
18 x 20 4.0 3.0 13.0 7.5 0.8 ± 0.1
18 x 25 4.0 3.0 13.0 7.5 0.8 ± 0.1
18 x 31.5 4.0 3.0 13.0 7.5 0.8 ± 0.1
18 x 35 4.0 3.0 13.0 7.5 0.8 ± 0.1
18 x 40 4.0 3.0 13.0 7.5 0.8 ± 0.1
Bent 90° leads for horizontal mounting pinning Dimensions (mm)
Safety vent
C±0.3
-
max.
+
KAL0981-P-E
d max.
d
a±0.5
øb
marking
Minus pole
F±0.5
E±0.5