DW (ADW1)
–3–
ASCTB8E 201603-T
RATING
1. Coil data
1) 1 coil latching type
2) 2 coil latching type
*Square, pulse drive
2. Specifications
Notes: *1. Minimum switching load is a guide to the lower current limit of switching under the micro-load. This parameter is changed by the condition, such as switching times,
environment condition, and expected reliability. Therefore, Panasonic Corporation cannot assure the reliability. When the relay is used lower than minimum
switching load, reliability is attrition. Please use the relay over minimum switching load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. Allowable range when in original packaging is –40°C to +70°C –40°F to +158°F.
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
66.7mA 45Ω
200mW
110%V of nominal
voltage
5V DC 40.0mA 125Ω
6V DC 33.3mA 180Ω
9V DC 22.2mA 405Ω
12V DC 16.7mA 720Ω
24V DC 8.3mA 2,880Ω
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC
*80%V or less of
nominal voltage
(Initial)
*80%V or less of
nominal voltage
(Initial)
133.3mA 133.3mA 22.5Ω 22.5Ω
400mW 400mW
110%V of nominal
voltage
5V DC 80.0mA 80.0mA 62.5Ω 62.5Ω
6V DC 66.7mA 66.7mA 90 Ω 90 Ω
9V DC 44.4mA 44.4mA 202.5Ω 202.5Ω
12V DC 33.3mA 33.3mA 360 Ω 360 Ω
24V DC 16.7mA 16.7mA 1,440 Ω 1,440 Ω
Characteristics Item
Specifications
Standard type Inrush type
Contact
Arrangement 1 Form A
Contact resistance (Initial) Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact material AgSnO2 type
Rating
Nominal switching capacity (resistive load) 8A 250V AC 16A 277V AC
Max. switching power (resistive load) 2,000VA 4,432VA
Max. switching voltage 250V AC 277V AC
Max. switching current 8A AC 16A AC
Nominal operating power 200mW (1 coil latching type), 400mW (2 coil latching type)
Min. switching capacity (Reference value)*
1
100mA 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section)
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 5,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown voltage*
2
(Between contact and coil)
12,000 V (Initial)
Set time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Reset time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Mechanical
characteristics
Shock resistance
Functional 100 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
Destructive 1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10μs)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life
Mechanical Min. 10
6
(at 180 times/min.)
Electrical
Resistive load
Min. 5 × 10
4
(at 8A 250V AC, at 20 times/min.)
Min. 10
5
(at 5A 250V AC, at 20 times/min.)
(IEC60335-1 type only)
Min. 2 × 10
4
(at 16A 277V AC, ON:OFF = 1s:5s)
Min. 5 × 10
4
(at 8A 250V AC, at 20 times/min.)
Inrush current —
Min. 2.5 × 10
4
[Inrush 100A 600W (120V AC)
Tungsten]
Cycle rate ON:OFF = 1s:59s
Conditions
Conditions for operation, transport and
storage*
3
*
4
Temperature: –40°C to +85°C –40°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Temperature: –40°C to +85°C –40°F to +185°F
(8A or less),
–40°C to +70°C –40°F to +158°F
(Over 8A to 16A)
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Unit weight Approx. 8 g .28 oz (Low profile type: Approx. 7.5 g .26 oz)
