ADUX1020-EVAL-SDP

ADUX1020-EVAL-SDP User Guide UG1022
Rev. 0 | Page 7 of 9
Figure 13. ADUX1020-EVAL-SMALL Small Form-Factor Breakout Board Schematic
UG1022 ADUX1020-EVAL-SDP User Guide
Rev. 0 | Page 8 of 9
14766-014
EXTERNAL ( NON USB BUS ) VOLTAGE FOR LED
USED TYPICALLY FOR SERIES LEDS TO ALLOW LARGER CURRENT >200MA)
NOTE THAT USB 4.75V SUPPLY MAY NOT BE SUFFICENT FOR CURRENTS OVER 200MA
POPULTE R12 AND REMOVE R11
CHOOS 3 SERIES LED D3,D4,D5
POPULATE R11 AND REMOVE R12 (DEFAULT)
CHOOSE TWO // LED D1 AND D2 (HIGH CURRENT)
POPULATE R8 AND REMOVE R7 (DEFAULT)
FOR SWITCHED CONSTANT (2.4A) TOTAL CURRENT
POPULATE R7 AND REMOVE R8
FOR CONTROL OF CURRENT LEVEL BY ADUX1020
61300111121
DNI
0
NCLED_RAIL
0
61300111121
ADP7102ARDZ-5.0
10UF
FDV302P
0
100
0
22UF 100UF
61300111121
61300111121
61300111121
50OHMS
1
17.4K10K
0
SFH 4259
DNI
SFH 4259
SFH 4259
10UF
100
1
FDN335N
DNI
SFH 4259
SFH 4259
MBR130T3G
MBR130T3G
NCLED_RAIL
PJ-102BH
1
MOLEX22-28-4033
D5
D7
P8
D2
P5
R6
P7
R3
R9
R8
P2
R4
E1
R2 R1
R7
P12
P1
Q1
Q2
P10
P6
U1
C2C1
R10
C3
R11
R12
D3
D1
D4
C4
R5
D6
P11
GND_LOCAL
LEDX2
DUT_LED_DRIVE2
VLED
GND_LOCAL
DUT_LED_DRIVE2
GND_LOCAL
GND_LOCAL GND_LOCAL
GND_LOCAL
VLED
LEDX2
GND_LOCAL
LEDX2
LEDX2
GND_LOCAL
DUT_LED_DRIVE2
GND_LOCAL
LEDX2
GND_LOCAL
GND_LOCAL
2
2
3
5
6
1
2
3
1
2
2
1
2
4
3
7
PAD
8
2
1
2
3
1
1 3
4
1
4 4
3
4
3
1
4
2
1 3
C
A
PIN
SPARE
PIN
SPARE
SENSE_ADJ
PAD
VIN
PGEN_UVLO
NC
GND
VOUT
PIN
SPARE
G
D
S
G
D
S
Figure 14. ADUX1020-EVALZ-LED High power LED daughterboard Schematic
ADUX1020-EVAL-SDP User Guide UG1022
Rev. 0 | Page 9 of 9
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIAB
LE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2016 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG14766-0-6/16(0)

ADUX1020-EVAL-SDP

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Distance Sensor Development Tool 12-bit 60MSPS AFETG with 25-channel Vdr
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet