FPC connectors Y3BL (0.3mm pitch)
–2–
ACCTB52E 201602-T
PRODUCT TYPES
Notes: 1. Order unit;
For volume production: 1-inner carton (1-reel) units
For samples, please contact our sales office.
2. Please contact our sales office for connectors having a number of pins other than those listed above.
SPECIFICATIONS
1. Characteristics
The followings show specifications, when using an applicable FPC (thickness 0.20 mm)
2. Material and surface treatment
Height Number of pins Part number
Packing
Inner carton (1-reel) Outer carton
0.6 mm
7 AYF350725
5,000 pieces 10,000 pieces
11 AYF351125
15 AYF351525
23 AYF352325
25 AYF352525
27 AYF352725
31 AYF353125
39 AYF353925
45 AYF354525
51 AYF355125
Item Specifications Conditions
Electrical
characteristics
Rated current 0.2A/pin contact
Rated voltage 50V AC/DC
Insulation resistance Min. 1,000MΩ (initial) Using 250V DC megger (applied for 1 min.)
Dielectric strength 150V AC for 1 min.
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Contact resistance Max. 160mΩ
Based on the contact resistance measurement method
specified by JIS C 5402.
Mechanical
characteristics
FPC holding force Min. 0.10N/pin contact × pin contacts (initial)
Measurement of the maximum force applied until the
inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Environmental
characteristics
Ambient temperature –55°C to +85°C
No icing or condensation.
Storage temperature
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Thermal shock resistance
(with FPC mated)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 160mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(with FPC mated)
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 160mΩ
Conformed to IEC60068-2-78
Bath temperature 40°C±2°C,
humidity 90% to 95% R.H.
Saltwater spray resistance
(with FPC mated)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 160mΩ
Conformed to IEC60068-2-11
Bath temperature 35°C±2°C,
saltwater concentration 5%±1%
H2S resistance
(with FPC mated)
48 hours,
contact resistance max. 160mΩ
Bath temperature 40°C±2°C,
gas concentration 3 ppm ±1 ppm,
humidity 75% to 80% R.H.
Soldering heat resistance
Peak temperature: 260°C or less Reflow soldering
300°C within 5 sec. 350°C within 3 sec. Soldering iron
Lifetime
characteristics
Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time
Unit weight 51 pin contacts: 0.05 g
Part name Material Surface treatment
Molded portion
Housing: LCP resin (UL94V-0)
Lever: LCP resin (UL94V-0)
—
Contact Copper alloy
Contact portion; Base: Ni plating, Surface: Au plating
Terminal portion; Base: Ni plating, Surface: Au plating
Soldering terminal Copper alloy Ni on base, Pd + Au flash plating
Order Temperature (°C) Time (minutes)
1
2
3
4
–55
85
–55
0
−3
30
Max. 5
30
Max. 5
+3
0
0
−3
