H7GP-TDB Datasheet H7GP-CDB, H7GP-TDB, H7GP-TD | P1-P3

CSM_H7GP_DS_E_4_5

Total Counter/Time Counter (DIN 48 x 24)

H7GP

DIN 48 x 24-mm Total Counter/Time Counter

with Easy-to-read Displays and Water and

Oil Resistance Equivalent to IP66

• High-visibility, negative transmissive LCD display with 8.5-mm-

high characters and built-in red LED backlight at low power

consumption.

• IP66 with oil resistance and NEMA 4 protection achieved by

unifying the front with the case and by using oil-resistant parts

and materials.

• Compact (80 mm) body.

• Just change a switch setting for either an NPN or PNP input.

• Supports both external resetting and manual resetting.

• Finger-protection terminal block cover prevents electrical shock

and conforms to VDE0106, Part 100.

• Certified for UL and CSA safety standards.

• Complies with EMC standards (EN 61326) and CE Marking.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■ Model Number Legend

1. Classification

C: Total counter

T: Time counter

2. Supply Voltage

None: 100 to 240 VAC

D: 12 to 24 VDC

3. Case Color of Front Section

None: Light gray (Munsell 5Y7/1)

B: Black

Ordering Information

■ List of Models

Total counter

Time counter

1 2 3

H7GP-@@@

Supply voltage 6-digit total counter

Light gray Black

100 to 240 VAC H7GP-C H7GP-CB

12 to 24 VDC H7GP-CD H7GP-CDB

Supply voltage 6-digit time counter

Light gray Black

100 to 240 VAC H7GP-T H7GP-TB

12 to 24 VDC H7GP-TD H7GP-TDB

H7GP

Specifications

■ Ratings

Note: 1. Contains 20% ripple (p-p) max.

2. Only a non-voltage input (NPN transistor) is possible for the key protection input. The key protection input will be a non-voltage input even

if the NPN/PNP input mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will still be

functional.

Item 6-digit total counter 6-digit time counter

H7GP-C H7GP-CD H7GP-T H7GP-TD

Rated supply voltage 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1)

External power supply 50 mA at 12 VDC --- 50 mA at 12 VDC ---

Operating voltage range 85% to 110% of rated supply voltage

Power consumption 100 to 240 VAC: 6.5 VA max.

12 to 24 VDC: 0.6 W max.

Dimensions 48 x 24 x 80 mm (W x H x D)

Mounting method Flush mounting

External connections Screw terminals

Degree of protection Panel surface: IP66 with oil resistance and NEMA Type 4 (indoors).

Display 7-segment, negative transmissive LCD (with red backlight)

Digits 6 digits (8.5-mm-high characters)

Input mode Up (increment) Accumulative

Max. counting speeds 30 Hz or 5 kHz (selected via DIP switch) ---

Counting range 0 to 999999 ---

Time specification --- 0.1 to 99999.9 h/1 s to 99 h 59 min 59 s

(selected via DIP switch)

Timing accuracy --- ±100 ppm (–10°C to 55°C)

Memory backup EEP-ROM (overwrites: 200,000 times min.) that can store data for 20 years min.

Input Input signals Count, reset, and key protection (see note 2) Start, reset, and key protection (see note 2)

Input method No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)

Count, reset,

start

No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 kΩ max.

Short-circuit (ON) residual voltage:2 VDC max.

Open (OFF) impedance: 100 kΩ min.

Voltage input (PNP transistor input)

Short-circuit (ON) impedance: 1 kΩ max.

ON voltage: 9 to 24 VDC

OFF voltage: 5 VDC max.

Open (OFF) impedance: 100 kΩ min.

Key protection No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 kΩ max.

Short-circuit (ON) residual voltage:0.5 VDC max.

Open (OFF) impedance: 100 kΩ min.

Input re-

sponse

speed

Reset 20 or 1 ms (automatically switched according to counting

speed)

20 ms

Start --- 20 ms

Key protection Approx. 1 s Approx. 1 s

Reset system External and manual resets

H7GP

■ Characteristics

Note: 1. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

2. UL508 and CAN/CSA-C22.2 No.14 certification conditions

• Power supply 100 to 240VAC types

Ambient temperature 30°C Single mounting

• Power supply 12 to 24VDC types

Ambient temperature 40°C Single mounting

Insulation resistance 100 MΩ min. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(AC model)

1,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(DC model)

2,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (AC model)

Impulse withstand voltage 3 kV (between power terminals) (1 kV for 12-to-24-VDC models)

4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) (1.5 kV for 12-to-24-VDC

models)

Noise immunity ±1.5 kV (between AC power terminals), ±480 V (between DC power terminals),

±480 V (between input terminals);

square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

Static immunity Display: Malfunction:8 kV

Destruction:15 kV

DIP switch: Malfunction:4 kV

Destruction:8 kV

Vibration resistance Destruction: 10 to 55 Hz with 0.75-mm single amplitude, 2 hours each in three directions

Malfunction: 10 to 55 Hz with 0.5-mm single amplitude, 10 minutes each in three directions

Shock resistance

Destruction: 294 m/s

each in three directions

Malfunction: 196 m/s

each in three directions

Ambient temperature Operating: –10°C to 55°C (with no icing)

Storage: –25°C to 65°C (with no icing)

Ambient humidity Operating: 35% to 85%

EMC (EMI) EN61326-1 (note 1.)

Emission Enclosure: EN55011 Group 1 class A

Emission AC Mains: EN55011 Group 1 class A

(EMS) EN61326-1 (note 1.)

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);

10 V/m (Pulse-modulated, 900 MHz ±5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)

Immunity Burst: EN61000-4-4: 2 kV power-line (level 3);

2 kV I/O signal-line (level 4)

Immunity Surge: EN61000-4-5: 1 kV line to lines (power and output lines) (level 2);

2 kV line to ground (power and output lines) (level 3)

Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage)

Approved standards UL508 (note 2), CSA C22.2 No.14 (note 2), conforms to EN61010-1, VDE0106/P100

Case color Rear section: Gray smoke; Front section: 5Y7/1 (light gray) or N1.5 (black)

Weight Approx. 75 g

P1-P3 P4-P6 P7-P7

H7GP-TDB

Mfr. #:

Buy H7GP-TDB

Manufacturer:

Omron Automation and Safety

Description:

Controllers Count/Time Totalizer

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

H7GP-TDB

H7GP-TDB

Products related to this Datasheet