(images/product/prot61.jpg)
QFP surface mount
protoboard - 0.65mm
SKU: 319010053
(https://www.kickstarter.com/projects/seeed/wio-
link-3-steps-5-minutes-build-your-iot-
applicat/description?ref=banner_depot)
Description
A multi-purpose surface mount protoboard from Dangerous Prototypes. Great for getting started
(http://dangerousprototypes.com/docs/Main_Page#Processor_overviews) with a new microcontroller. It
has footprints for:
• 32-80pin xQFP packages (TQFP, VQFP, LQFP, etc)
• SOIC(W) chips from .150″ to .3″ (max 32 pins)
• xSSOP chips (max 32 pins)
• Button with pull-up resistor input area (2x)
• LED with resistor output area (8x)
• SMD or through hole crystal with capacitors
• SOT-23-3/5/6 (6x)
• 0805 R and C (8x, plus extras near IC footprints)
• DO-323 (8x)
• 24×10 pin through-hole prototype area
• Power bus routed near all components
• Silk labels on top and bottom
•Open source (CC-BY-SA)
Don't know your size? See choosing a prototype board
(http://dangerousprototypes.com/docs/Choosing_a_breakout_board).
Documentation (http://dangerousprototypes.com/docs/Dangerous_Protoboards#xQFP_protoboard)
If you encounter any problems when using this product, here is theforum
(http://dangerousprototypes.com/forum/index.php)from which you can get the technical support.
Overview
Page 1 of 2
