Broadcom Condential
- 1 -
Description
The ACPL-P347/W347 contains an AlGaAs LED, which is
optically coupled to an integrated circuit with a power output
stage. This optocoupler is ideally suited for driving SiC/GaN
(Silicon Carbide/Gallium Nitride) MOSFETs and IGBTs used in
power conversion applications. The high operating voltage
range of the output stage provides the drive voltages required
by gate-controlled devices. The voltage and high peak output
current supplied by this optocoupler make it ideally suited for
direct driving SiC/GaN MOSFET and IGBT with ratings up to
1200V/50A.
Functional Diagram
ACPL-P347/ACPL-W347
1.0-Amp Output Current SiC/GaN MOSFET and
IGBT Gate Drive Optocoupler in Stretched SO6
Data Sheet
Features
1.0A maximum peak output current
Wide operating V
CC
range: 15V to 30V
110 ns maximum propagation delay
50 ns maximum propagation delay dierence
Rail-to-rail output voltage
50 kV/µs minimum Common Mode Rejection (CMR) at V
CM
= 1500V
LED current input with hysteresis
ICC = 4.2 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with hysteresis
Industrial temperature range: –40°C to +105°C
Safety Approval
— UL Recognized 3750V/5000V
RMS
for 1 min.
— CSA
— IEC/EN/DIN EN 60747-5-5 V
IORM
= 891V/1140V
peak
Applications
SiC/GaN MOSFET and IGBT gate drive
Motor drives
Industrial Inverters
Renewable energy inverters
Switching power supplies
Note: A 1 µF bypass capacitor must be connected between pins V
CC
and V
EE
.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component
to prevent damage and/or degradation which may be induced by ESD. The components featured in this data
sheet are not to be used in military or aerospace applications or environments.
Truth Table
LED
V
CC
– V
EE
POSITIVE GOING
(TURN-ON)
V
CC
– V
EE
NEGATIVE GOING
(TURN-OFF)
V
O
OFF 0V to 30V 30 to 0V LOW
ON 0V to 12.1V 11.1V to 0V LOW
ON 12.1V to 13.9V 12.9V to 11.1V TRANSITION
ON 13.9V to 30V 30V to 12.9V HIGH
1
2
3
6
5
4
V
CC
V
EE
CATHODE
NC
ANODE
V
OUT