AOZ8808DI-05

Rev. 2.1 May 2012
www.aosmd.com
Page 1 of 8
AOZ8808
Ultra-Low Capacitance TVS Diode
General Description
The AOZ8808 is a transient voltage suppressor array
designed to protect high speed data lines such as HDMI,
USB 3.0, MDDI, SATA, and Gigabit Ethernet from
damaging ESD events.
This device incorporates eight surge rated, low
capacitance steering diodes and a TVS in a single
package. During transient conditions, the steering diodes
direct the transient to either the positive side of the power
supply line or to ground.
The AOZ8808 provides a typical line-to-line capacitance
of 0.3 pF and low insertion loss up to 6 GHz providing
greater signal integrity making it ideally suited for
HDMI 1.3 or USB 3.0 applications, such as Digital TVs,
DVD players, computing, set-top boxes and MDDI
applications in mobile computing devices.
The AOZ8808 comes in a RoHS compliant and Halogen
Free 2.5 mm x 1.0 mm x 0.55 mm DFN-10 package and
is rated for -40 °C to +85 °C junction temperature range.
Features
ESD protection for high-speed data lines:
IEC 61000-4-2, level 4 (ESD) immunity test
Air discharge: ±15 kV; contact discharge: ±15 kV
IEC61000-4-4 (EFT) 40 A (5/50 nS)
IEC61000-4-5 (Lightning) 4 A (8/20 µS)
Human Body Model (HBM) ±24 kV
Array of surge rated diodes with internal TVS diode
Small package saves board space
Protects four I/O lines
Low capacitance between I/O lines: 0.3 pF
Low clamping voltage
Low operating voltage: 3.3V, 5.0 V
Applications
HDMI, USB 3.0, MDDI, SATA ports
Monitors and flat panel displays
Set-top box
Video graphics cards
Digital Video Interface (DVI)
Notebook computers
Typical Applications
Figure 1. USB 3.0 Ports Figure 2. HDMI Ports
AOZ8808
AOZ8808
TX2+
TX2-
TX1+
TX1-
TX0+
TX0-
CLK+
CLK-
HDMI
Transmitter
RX2+
RX2-
RX1+
RX1-
RX0+
RX0-
CLK+
CLK-
HDMI
Receiver
Connector Connector
AOZ8808
AOZ8808
AOZ8802A
AOZ8808
D+
D-
SSRX+
SSRX-
SSTX+
SSTX-
USB 3.0
Transceiver
D+
D-
SSRX+
SSRX-
SSTX+
SSTX-
USB 3.0
Connector
AOZ8808
Rev. 2.1 May 2012
www.aosmd.com
Page 2 of 8
Ordering Information
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Notes:
1. IEC 61000-4-2 discharge with C
Discharge
= 150pF, R
Discharge
= 330
.
2. Human Body Discharge per MIL-STD-883, Method 3015 C
Discharge
= 100 pF, R
Discharge
= 1.5 k
.
Maximum Operating Ratings
Part Number Ambient Temperature Range Package Environmental
AOZ8808DI-03 -40 °C to +85 °C 2.5 mm x 1.0 mm x 0.55 mm DFN-10 RoHS Compliant
Green Product
AOZ8808DI-05
1
2
3
4
5
10
9
8
7
6
CH1
CH2
VN
CH3
CH4
NC
NC
VN
NC
NC
DFN-10
(Top View)
Parameter AOZ8808DI-03 AOZ8808DI-05
Storage Temperature (T
S
) -65 °C to +150 °C
ESD Rating per IEC61000-4-2, contact
(1)
±15 kV
ESD Rating per IEC61000-4-2, air
(1)
±15 kV
ESD Rating per Human Body Model
(2)
±24 kV
Parameter Rating
Junction Temperature (T
J
) -40 °C to +125 °C
AOZ8808
Rev. 2.1 May 2012
www.aosmd.com
Page 3 of 8
Electrical Characteristics
T
A
= 25°C unless otherwise specified.
Notes:
3. These specifications are guaranteed by design and characterization.
4. Measurements performed using a 100ns Transmission Line Pulse (TLP) system.
Symbol Parameter Diagram
I
PP
Maximum Reverse Peak Pulse Current
V
CL
Clamping Voltage @ I
PP
V
RWM
Working Peak Reverse Voltage
I
R
Maximum Reverse Leakage Current
V
BR
Breakdown Voltage
I
T
Test Current
V
F
Forward Voltage @ I
F
P
pk
Peak Power Dissipation
C
J
Max. Capacitance @ V
R
= 0 and f = 1 MHz
Device
Device
Marking
V
RWM
(V)
Max.
V
BR
(V)
Min.
I
T
= 100 A
I
R
(µA)
Max.
V
F
(V)
Typ.
V
CL
Max.
(3)(4)
C
J
(pF)
I
PP
= 1 A I
PP
= 12 A
Typ. Max.
AOZ8808DI-03 F 3.3 3.5 1.0 0.85 3.5 8.0 0.6 0.75
AOZ8808DI-05 A 5.0 6.0 1.0 0.85 4.0 9.0 0.6 0.75
I
I
F
I
R
I
T
I
PP
V
F
V
CL
V
BR
V
RWM
V

AOZ8808DI-05

Mfr. #:
Manufacturer:
Description:
TVS DIODE 5V 9V 10DFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet