4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.com
Rev. 03, 2018-05-21
8
PTMC210404MD
Package Outline Specifications (cont.)
Package PG-HB1DSO-14-1
(formed leads, bottom side)
Diagram Notes-unless otherwise specified:
1. Mold/dam bar/metal protusions of 0.30 mm max per side not included.
2. Metal protrusions are connected to source and shall not ecxceed
0.10 mm max.
3. Fillets and radii: all radii are 0.3 mm max.
4. Interpret dimensions and tolerances per ISO 8015.
5. Dimensions are mm.
6. All tolerances ± 0.1 mm.
7. All metal surfaces pre-plated, except area of cut.
8. Lead thickness: 0.25 mm.
9. Gold plating thickness: 0.25 micron [10 microinch] max.
4X 1.02
9.02
0.52 X 45°
2X 5.30
7.65
2.35
3.83
2X 2.02
2X 0.35
1.50
2X 3.25
11X 1.00
13.06
4.00
2.62
0.10 MAX.
1.27
1.86
Z
Y
12X 0.35
1
14.94 ± 0.15
4
X 7
°
2 X 10°
19.44
1
PG-HB1DSO-14L_01_11-06-2015
Z (5:1)
R
0.20
1.00
1.02
2
2
3.00
0.05
2x 0.50
6.91
3.45
16.26
18.44
0
.25
0.25
5°±
3°
STAND OFF
0...0.1
0° MIN.
Diagram Notes–unless otherwise specified:
1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included.
2. Metal protrusion are connected to source and shall not exceed 0.10mm max.
3. Fillets and radii: all radii are 0.3 mm max.
4.Interpret dimensions and tolerances per ISO 8015.
5. Dimensions are mm.
6. All tolerances ± 0.1mm unless specified otherwise.
7. All metal surfaces pre-plated, except area of cut.
8. Lead thickness: 0.25 mm.
9. Gold plating thickness: 0.25 micron [10 microinch] max.
Diagram Notes—unless otherwise specified:
1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.
2. Metal protrusions are connected to source and shall not exceed 0.10 mm max.
3. Fillets and radii: all radii are 0.30 mm max.
4. Interpret dimensions and tolerances per ISO 8015.
5. Dimensions are mm.
6 All tolerances ± 0.1 mm unless specified otherwise.
7. All metal surfaces pre-plated, except area of cut.
8. Lead thickness: 0.25 mm.
9. Gold plating thickness: 0.25 micron max.
PG-HB1DSO-14-1_01_01-16-2017