OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LXMG221D-0700040-D2F

P1-P3P4-P6P7-P8
LXMG2203
PRODUCTION DATASHEET
LXMG221D-0700040-D2F
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 1
Copyright © 2011
Rev. 1.1, 2011-12-02
40W 700mA Dimmable HV LED Driver Module
TM
®
WWW.Microsemi .COM
L
L
X
X
M
M
G
G
2
2
2
2
1
1
D
D
-
-
0
0
7
7
0
0
0
0
0
0
4
4
0
0
-
-
D
D
2
2
F
F
•
DESCRIPTION
KEY FEATURES
The LXMG221D-0700040-D2F is a
fully enclosed compact solid-state LED
lighting driver module. It operates from a
universal AC input supply in the range of
347V
AC
to 480V
AC
, 60Hz to drive a string
of LEDs with active power factor
correction. LED string voltage can range
from 20V to 57V at a constant current of
700mA.
Control terminal leads include a
dimming input BRITE A with a dedicated
RETURN lead. The amplitude of the
output LED string current will vary from
10% to 100% corresponding to a 1V
DC
to
10V
DC
signal on the BRITE A input
following the 0V to 10V ESTA E1.3-2001
Analog Control Specification Standard.
The BRITE A terminal when pulled down
below minimum dimming will turn off the
LEDs and enter a low power consumption
mode. A second control terminal lead
provides a FAULT indicator.
In the case that there is an LED string
short between OUTPUT(+) and
OUTPUT(-), or string open, or a product
over temperature condition the FAULT
terminal will go low. The FAULT
terminal includes an open collector device
that can be pulled up to a maximum of
60V and will sink 8mA typical to 0.8V
when a short or open fault occurs.
To reduce audible noise the internal
switching frequency remains above
30kHz. Safety features include open
output circuit protection, whole string
short circuit protection. The maximum
allowable hot spot case temperature is
90°C (above this temperature the module
will be thermally self-protected). The
recommended operating ambient
temperature range is -30°C to 70°C, as
long as the maximum case temperature is
not exceeded. The compact enclosure is
rated to IP66, meets UL8750 and UL1310
class 2.
•
High Voltage AC Input: 347V
AC
to
480V
AC
• High Efficiency
• Active Power Factor Correction
• Constant Current 700mA
• Dimming Input Provides 10% to
100% Range, Plus Shutdown
• Anode Supply Adjusts for String
Voltage between 20V and 57V
• Small Compact Size
• Suitable for Damp Locations (IP66)
• UL8750 & UL1310
• UL File E337545
• FCC Class B
• Long Life Expectancy
• RoHS Compliant
• Full Protection: OVP, SCP, OTP,
Maximum Power Limit
• Unique Fault Detection and
Management
•
APPLICATIONS
Residential and Commercial LED
Lighting Fixtures such as:
• LED Down Lights
• LED Street Lights
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
Patents Pending
PRODUCT HIGHLIGHT
Photo is representative only, actual product may differ slightly
ORDER INFORMATION
Part Number Input Voltage
Output Current Fault Output
LXMG221D-0700040-D2F 347V
AC
to 480V
AC
60Hz
700mA Dimmable Current Source
20V to 57V Anode Voltage
Yes
LXMG2203
PRODUCTION DATASHEET
LXMG221D-0700040-D2F
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 2
Copyright © 2011
Rev. 1.1, 2011-12-02
40W 700mA Dimmable HV LED Driver Module
TM
®
WWW.Microsemi .COM
L
L
X
X
M
M
G
G
2
2
2
2
1
1
D
D
-
-
0
0
7
7
0
0
0
0
0
0
4
4
0
0
-
-
D
D
2
2
F
F
ABSOLUTE MAXIMUM RATINGS
Input Voltage (V
IN
) ............................................................................................................................................ 0V
AC
to 528V
AC
Input Power ......................................................................................................................................... 50W (Internally Limited)
Input Frequency (V
IN
) .......................................................................................................................................... 57Hz to 63Hz
Peak Output LED String Current .................................................................................................... 810mA (Internally Limited)
Peak Output String Voltage .............................................................................................................. 59.5V (Internally Limited)
Output Power ...................................................................................................................................... 44W (Internally Limited)
Input Signal Voltage (BRITE A Input) ........................................................................... -0.3V to greater of 10V or OUTPUT(+)
Output Signal Voltage (FAULT) ............................................................................................................................ -0.3V to 60V
Cold Start Temperature .................................................................................................................................................... -30°C
Hot Spot Case Temperature, zero airflow ......................................................................................................................... 90°C
Storage Temperature Range .............................................................................................................................. -40°C to 85°C
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out
of specified terminal.
RECOMMENDED OPERATING CONDITIONS (R.C.)
This module has been designed to operate over a wide range of input and output conditions. However, best efficiency and performance will be
obtained if the module is operated under the condition listed in the ‘R.C.’ column. Min. and Max. columns indicate values beyond which the
inverter, although operational, might not function optimally.
Parameter Symbol Min R.C. Max Units
Input Supply Voltage Range V
IN
347 480 V
AC
Linear BRITE A Control Input Voltage Range V
BRITE A
0 10 V
Linear BRITE A Control PWM Frequency Range
(Open Collector)
V
BRITE_PWM
0.2 10 kHz
Linear BRITE A Control PWM Amplitude Range
(Totem Pole)
V
BRITE_PWM
10 V
OUTPUT(+)
V
Linear BRITE A Control PWM Frequency Range
(Totem Pole)
V
BRITE_PWM
0.2 25 kHz
LED String Voltage (at 700mA)
1
V
LED
40
1)
57 V
OUTPUT(-) Sink Current OUTPUT(-)
ISINK
700 mA
Maximum Allowable Case Temperature T
C
90 °C
Cold Start Temperature T
COLD
-30 °C
1) Operation has been verified down to 20V, but it is recommended that low voltage performance with actual loading be verified by the user.
0
100
200
300
400
500
600
700
800
‐30 ‐150 153045607590
LED Output Current (mA)
Case Temperature (°C)
Typical Temperature Derating Curve
VBRITEA=10V
VBRITEA=1V
0
100
200
300
400
500
600
700
800
240 280 320 360 400 440 480 520
LED Output Current (mA)
Input Supply Voltage (V
AC
)
Typical Supply Voltage Derating Curve
VBRITEA=10V
VBRITEA=1V
LXMG2203
PRODUCTION DATASHEET
LXMG221D-0700040-D2F
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570
Page 3
Copyright © 2011
Rev. 1.1, 2011-12-02
40W 700mA Dimmable HV LED Driver Module
TM
®
WWW.Microsemi .COM
L
L
X
X
M
M
G
G
2
2
2
2
1
1
D
D
-
-
0
0
7
7
0
0
0
0
0
0
4
4
0
0
-
-
D
D
2
2
F
F
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, the following specifications apply over the recommended operating condition except where otherwise
noted; V
IN
= 347V
AC
to 480V
AC
, 60Hz; BRITE A = 8kΩ to RETURN; FAULT = 1kΩ pull up to 10V Full Load condition uses an LED
load with 57V
DC
@ 700mA unless otherwise noted. Case temperature range: -30°C to 90ºC; production tested at 25ºC.
Parameter Symbol Test Conditions / Comment Min Typ Max Units
Input Voltage V
IN
Line Frequency 57 to 63 Hz 312 528 V
AC
Off Power P
IN(MIN)
BRITE A ≤ 0.5V, V
IN
= 480V
AC
0.5 W
Input AC Current
I
347
Measured at Full Load and 347V
AC
Input 175 mA
I
480
Measured at Full Load and 480V
AC
Input 125 mA
Maximum Inrush Current I
INRUSH
Measure at 480V
AC
Peak AC Line;
Maximum Duration 10μs
60 A
Measure at 480V
AC
Peak AC Line
Measured after 10μs
5 A
Power Factor Full Load, 347V
AC
to 480V
AC
0.9 PF
Efficiency
η
Full Load, V
LED
= 57V, V
IN
= 480V
AC
88 91 %
Total Harmonic Distortion THD Full load, 347V
AC
to 480V
AC
15 %
OUTPUTS
Average Sink Current I
OUT-
T
A
= 25°C 665 700 735 mA
LED String Voltage V
OUTΔ
Rated LED current 20 57 V
Ripple (pk-pk) V
OUTΔ
Full Load, V
LED
= 57V, (pk to pk)/Average 2 %
Line Regulation I
OUT-
V
IN
= Nominal ± 10% (i.e. 480V
AC
± 10%) 1 %
Load Regulation IOUT- OUTPUT(+) 40V to 57V 1 %
Turn-on Time t
TURN_ON
Cold Start, Power ON 0.2 0.5 Sec
Output Overshoot /
Undershoot
I
OUT+
Turning Power On or Off 10 %
Dimming
BRITE A Voltage Setting V
BRITE A
For maximum brightness 9.5 10 10.5
V
For Minimum brightness 0.95 1 1.05
BRITE A Output Current I
BRITE A
BRITE A to RETURN 1.19 1.25 1.37 mA
Minimum Output Current I
MIN
BRITE A = 0.95V 10
% of
Max
Output Current Dim Range
(Analog Dimming)
I
LED
= 700mA, BRITE A
= 0.95V Versus BRITE
A
≥ 10V
10:1 RATIO
Shutdown Voltage V
BRITE A
0.8 V
FAULT
Output Voltage Low V
FAULT
Short OUTPUT(+) to OUT(-), FAULT = 8mA 0.8 V
Leakage Current I
FAULT
No fault, V
FAULT
= 57V 10 µA
Protection
Overvoltage Protection V
OV
Maximum OUT(+) 57.5 58.5 59.5 V
Over Temperature
Shutdown
T
OT
Over Case Temperature Protection Hot Spot 90 95 °C
P1-P3P4-P6P7-P8

LXMG221D-0700040-D2F

Mfr. #:
Buy LXMG221D-0700040-D2F
Manufacturer:
Microchip / Microsemi
Description:
LED Power Supplies LED Drivers Modules - Solid State Lighting
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet