© Semiconductor Components Industries, LLC, 2011
April, 2011 − Rev. 3
1 Publication Order Number:
NCS2566/D
NCS2566
Six-Channel Video Driver
with Triple SD & Triple
Selectable SD/HD Filters
The NCS2566 integrates reconstruction filters and video amplifiers.
It’s a combination of two 3−channel drivers − the first one capable to
deal with Standard Definition (SD) video signals and a second one
including selectable filters for either Standard or High Definition
(HD) video applications. The filters implemented are 6
th
order
Butterworth Low Pass filters particularly effective for rejecting
unwanted high frequency components and assuring good linearity of
the phase change over frequency with well optimized group delays.
All channels can accept DC− or AC−coupled signals; when AC−
coupled the internal clamps are employed. The outputs can drive both
AC− and DC−coupled 150 W loads.
It is designed to be compatible with most Digital−to−Analog
Converters (DAC) embedded in video processors. To further reduce
power consumption, two enable pins are provided, one for each triple
driver. One pin allows selection of the filter frequency of the SD/HD
triple driver.
Features
• 3−Channel with Selectable 6
th
−Order 8/34 MHz Butterworth Filters
• 3−Channel with Fixed 6
th
−Order 8 MHz Butterworth Filters
• Transparent Input Clamp for Each Channel
• Integrated Level Shifter
• AC− or DC−Coupled Inputs and Outputs
• Low Quiescent Current
• Shutdown Current 42 mA Typical (Disabled)
• 5 V Power Supply
• Each Channel Capable to Drive 2 by 150 W Load
• Internal Gain: 6 dB $0.2
• Wide Input Common Mode Range
• 8 kV ESD Protection (IEC61000−4−2 Compatible)
• Operating Temperature Range: −40°C to +85°C
• Available in a TSSOP−20 Package
• These are Pb−Free Devices
Typical Applications
• Set−Top Box
• DVD players and related
• HDTV
TSSOP−20
DTB SUFFIX
CASE 948E
MARKING DIAGRAM
PIN CONNECTIONS
1
2
3
4
5
6
7
8
20
19
18
16
15
14
13
(Top View)
VCC
SD IN1
SD IN2
SD IN3
SD EN
SD/HD
SD/HD IN1
SD/HD IN2
SD/HD OUT3
GND
SD/HD OUT2
GND
SD OUT1
9
10 11
12
17
SD/HD IN3
NC NC
SD OUT2
SD OUT3
SD/HD OUT1
SD/HD EN
http://onsemi.com
20
1
NCS
2566
ALYWG
G
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
ORDERING INFORMATION