STANDARD MICROCIRCUIT DRAWING BULLETIN – Continued.
DATE: 16-03-21
Standard
microcircuit drawing
Vendor
CAGE
Vendor
similar
5962R8853801VGA 24355 (4) OP215AJ/QMLR
5962R8853801VPA 24355 (4) OP215AZ/QMLR
5962R8853801V2A 3/ OP215ARC/QMLR
5962R8853804V2A 24355 (4) OP215ARC/QMLR
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3/ Not available from an approved source of supply.
Vendor CAGE Vendor name
number and address
24355 (2) Analog Devices
Route 1 Industrial Park
P.O. Box 9106
Norwood, MA 02062
Point of contact: 804 Woburn Street
Wilmington, MA 01887-3462
24355 (4) Analog Devices
Route 1 Industrial Park
P.O. Box 9106
Norwood, MA 02062
Point of contact: 7910 Triad Center Drive
Greensboro, NC 27409-9605
The information contained herein is disseminated for convenience only and the
Government assumes no liability whatsoever for any inaccuracies in the
information bulletin.
2 of 2