High Speed, Triple Differential Receiver
Data Sheet
FEATURES
High speed: 500 MHz, 2000 V/µs @ G = 1, V
OUT
= 2 V p-p
0.1 dB flatness out to 75 MHz
High CMRR: 69 dB @ 10 MHz
High differential input impedance: 1 MΩ
Wide input common-mode range: ±3.5 V (±5 V supplies)
On-chip, gain setting resistors can be configured for gain of 1 or 2
Fast settling: 15 ns to 0.1% @ 2 V p-p
Low input referred noise: 13 nV/√Hz
Disable feature
Small packaging: 32-lead, 5 mm × 5 mm LFCSP
AEC-Q10 qualified (AD8145W)
APPLICATIONS
RGB video receivers
YPbPr video receivers
Keyboard, video, mouse (KVM)
Unshielded twisted pair (UTP) receivers
Qualified for automotive applications
Automotive driver assistance (AD8145W)
Automotive Infotainment (AD8145W)
FUNCTIONAL BLOCK DIAGRAM
OUT_G
OUT_B
OUT_R
COMPB_IN+
COMPB_IN–
GND
GND
1
2
3
4
5
6
7
8
17
18
19
20
21
22
23
24
2526272829303132
V
S+
GND
V
S–
DIS/PD
REF_B
GAIN_B
IN+_B
IN–_B
GND
GND
REF_G
GAIN_G
IN+_G
IN–_G
REF_R
GAIN_R
GND
GND
COMPB_OUT
COMPA_OUT
COMPA_IN–
COMPA_IN+
IN–_R
IN+_R
GND
9 10 11 12 13 14 15 16
+
–
+
–
+
–
+
–
C
R R
A
B
+
–
+
–
C
C
R R
R
R
AD8145
06307-001
Figure 1.
GENERAL DESCRIPTION
The AD8145 is a triple, low cost, differential-to-single-ended
receiver specifically designed for receiving red-green-blue (RGB)
video signals over twisted pair cable or differential printed circuit
board (PCB) traces. It can also be used to receive any type of
analog signal or high speed data transmission. Two auxiliary
comparators with hysteresis are provided that can be used to
decode video sync signals, which are encoded on the received
common-mode voltages, to receive digital signals or as general-
purpose comparators. The AD8145 can be used in conjunction
with the AD8133 or AD8134 triple differential drivers to provide a
complete low cost solution for RGB over Category 5 UTP cable
applications, including KVM.
The excellent common-mode rejection (69 dB @ 10 MHz) of
the AD8145 allows for the use of low cost, unshielded twisted
pair cables in noisy environments.
The AD8145 can be configured for a differential-to-single-ended
gain of 1 or 2 by connecting the GAIN_x pin of each channel to
its respective output (G = 1) or connecting it to a reference voltage
(G = 2), which is normally grounded.
A REF_x input is provided on each channel that allows designers to
level shift the output signals.
The AD8145W is the automotive grade version that is qualified
for use in automotive applications. See the Automotive Products
section for more details.
The AD8145 is available in a 5 mm × 5 mm, 32-lead LFCSP and
is rated to work over the extended industrial temperature range
of −40°C to +105°C.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2014 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
