EVAL-AD5420EBZ Datasheet EVAL-AD5420EBZ | P10-P12

UG-441 Evaluation Board User Guide

Rev. D | Page 10 of 12

ORDERING INFORMATION

BILL OF MATERIALS

Table 5.

Qty Reference Designator Description Supplier/Number

1 U1 16-bit current source DAC Analog Devices/AD5420AREZ

1 U2 5 V voltage reference Analog Devices/ADR435ARZ

1 U3 3.3 V low dropout voltage regulator Analog Devices/ADP3303ARZ-3.3

1 U4 USB microcontroller Cypress Semiconductor

Corporation/CY7C68013-56LFC

1 U5 64 K EEPROM Digi-Key/24LC64-I/SN-ND

1 U6 12-bit ADC Analog Devices/AD7321BRUZ

1 U7, U8 Quad 2:1 multiplexers Analog Devices/ADG774BRQZ

1 U9 Low power, precision operational amplifier AD820ARZ

1 C51 680 nF, 16 V, Y5V, ceramic capacitor Digi-Key/490-1581-1-ND

LK15

6-pin (3 × 2) 0.1" header and shorting bar

FEC 1022231 and FEC 150411

1 J8 2-row, 36 + 36 header FEC 1022244 (36 + 36 pin strip)

5 LK3, LK10, LK13, LK17, LK18 2-pin (0.1" pitch) header and shorting shunt FEC 1022247 and FEC 150-411

7 LK1, LK2, LK5, LK6, LK7, LK8, LK9 3-pin (0.1" pitch) header and shorting shunt FEC 1022249 and FEC 150-411

1 J3 50 Ω SMB jack FEC 1111349

1 C3 22 nF, 16 V, X7R ceramic capacitor FEC 1658869

7 C19, C36, C37, C42, C45, C49, C56 10 µF, 10 V SMD tantalum capacitors FEC 1135234

1 R1 15 kΩ SMD precision resistor FEC 1140932

22 C13, C15,C18, C20, C21, C22, C23, C24, C25,

C26, C27, C28, C29, C30, C34, C35, C39, C41,

C43, C48, C55, C57

0.1 μF, 16 V, X7R ceramic capacitors FEC 1216538

C4, C8

0.1 μF, 100 V ceramic capacitors

FEC 1288275

4 J2, J5, J6, J7 2-pin terminal blocks (5 mm pitch) FEC 151789

1 C16 1 μF, 10 V SMD tantalum capacitor FEC 197099

2 D1, D2 Red SMD LEDs FEC 5790840

2 C32, C33 22 pF, 50 V, NPO ceramic capacitors FEC 722005

11 TP1 to TP11 Black test points FEC 8731128

3 R2, R23, R26 1 kΩ SMD resistors FEC 9330380

6 R3, R14, R19, R20, R21, R22 10 kΩ SMD resistors FEC 9330399

2 R16, R17 100 kΩ SMD resistors FEC 9330402

2 R24, R25 2.2 kΩ SMD resistors FEC 9330810

1 R13 39 kΩ SMD resistor FEC 9331158

R11

51 Ω SMD resistor

FEC 9331336

1 R12 5.6 kΩ SMD resistor FEC 9331352

8 R4 to R10, R18 0 Ω SMD resistor FEC 9331662

1 C31 2.2 µF, 10 V, Y5V ceramic capacitors FEC 9402098

1 Y2 24 MHz plastic SMD crystal FEC 9509658

2 C5, C9 10 µF, 63 V (FK series) electrolytic capacitors FEC 9696008

1 J1 USB Mini-B connector (USB-OTG) FEC 9786490

1 Q1 NPN transistor, PBSS8110Z FEC 8736677

Evaluation Board User Guide UG-441

Rev. D | Page 11 of 12

NOTES

UG-441 Evaluation Board User Guide

Rev. D | Page 12 of 12

NOTES

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly

return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred

damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to

the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer.

Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR

REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE

EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY

RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTIN G F RO M CUS TO MER’S POSSESSION OR USE OF THE

EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE

AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable

United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of

Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby

submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

registered trademarks are the property of their respective owners.

UG08160-0-10/13(D)

P1-P3 P4-P6 P7-P9 P10-P12

EVAL-AD5420EBZ

Mfr. #:

Buy EVAL-AD5420EBZ

Manufacturer:

Analog Devices Inc.

Description:

Data Conversion IC Development Tools EVAL BRD AD5420

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

EVAL-AD5420EBZ