NCP43080
www.onsemi.com
6
ABSOLUTE MAXIMUM RATINGS
Rating Symbol Value Unit
Supply Voltage V
CC
−0.3 to 37.0 V
MIN_TON, MIN_TOFF, MAX_TON, LLD Input Voltage V
MIN_TON
,
V
MIN_TOFF
,
V
MAX_TON
, V
LLD
−0.3 to V
CC
V
Driver Output Voltage V
DRV
−0.3 to 17.0 V
Current Sense Input Voltage V
CS
−4 to 150 V
Current Sense Dynamic Input Voltage (t
PW
= 200 ns) V
CS_DYN
−10 to 150 V
MIN_TON, MIN_TOFF, MAX_TON, LLD Input Current I
MIN_TON
, I
MIN_TOFF
,
I
MAX_TON
, I
LLD
−10 to 10 mA
Junction to Air Thermal Resistance, 1 oz 1 in
2
Copper Area, SOIC8
R
q
J−A_SOIC8
160 °C/W
Junction to Air Thermal Resistance, 1 oz 1 in
2
Copper Area, DFN8
R
q
J−A_DFN8
80 °C/W
Junction to Air Thermal Resistance, 1 oz 1 in
2
Copper Area, WDFN8
R
q
J−A_WDFN8
160 °C/W
Maximum Junction Temperature T
JMAX
150 °C
Storage Temperature T
STG
−60 to 150 °C
ESD Capability, Human Body Model, Except Pin 6, per JESD22−A114E ESD
HBM
2000 V
ESD Capability, Human Body Model, Pin 6, per JESD22−A114E ESD
HBM
1000 V
ESD Capability, Machine Model, per JESD22−A115−A ESD
MM
200 V
ESD Capability, Charged Device Model, Except Pin 6, per JESD22−C101F ESD
CDM
750 V
ESD Capability, Charged Device Model, Pin 6, per JESD22−C101F ESD
CDM
250 V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device meets latch−up tests defined by JEDEC Standard JESD78D Class I.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol Min Max Unit
Maximum Operating Input Voltage V
CC
35 V
Operating Junction Temperature T
J
−40 125 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
ELECTRICAL CHARACTERISTICS
−40°C ≤ T
J
≤ 125°C; V
CC
= 12 V; C
DRV
= 0 nF; R
MIN_TON
= R
MIN_TOFF
= 10 kW; V
LLD
= 0 V; V
CS
= −1 to +4 V; f
CS
= 100 kHz, DC
CS
=
50%, unless otherwise noted. Typical values are at T
J
= +25°C
Parameter
Test Conditions Symbol Min Typ Max Unit
SUPPLY SECTION
VCC UVLO (ver. B & C)
V
CC
rising V
CCON
8.3 8.8 9.3
V
V
CC
falling V
CCOFF
7.3 7.8 8.3
VCC UVLO Hysteresis (ver. B & C) V
CCHYS
1.0 V
VCC UVLO (ver. A, D & Q)
V
CC
rising V
CCON
4.20 4.45 4.80
V
V
CC
falling V
CCOFF
3.70 3.95 4.20
VCC UVLO Hysteresis
(ver. A, D & Q)
V
CCHYS
0.5 V
Start−up Delay
V
CC
rising from 0 to V
CCON
+ 1 V @ tr = 10 ms
t
START_DEL
75 125
ms
