83210 Data Sheet
©2016 Integrated Device Technology, Inc Revision A March 10, 20164
TABLE 4. AC CHARACTERISTICS, V
DD
= 1.5V ± 8%, TA = 0°C TO 85°C
Symbol
Parameter Test Conditions Minimum Typical Maximum Units
f
IN
Input Frequency 150 MHz
t
PLH
Propagation Delay, Low-to-High; NOTE 1 1.0 5.5 ns
t
PHL
Propagation Delay, High-to-Low NOTE 1 1.0 5.5 ns
tsk(o) Output Skew; NOTE 2, 4 110 ps
tsk(pp) Part-to-Part Skew; NOTE 3, 4 2ns
t
EN
Output Enable Time 7ns
t
DIS
Output Disable Time 7ns
t
R
/ t
F
Output Rise/Fall Time 20% to 80% 250 1.3 ns
odc Output Duty Cycle
Fout ≤ 100MHz
48 52 %
Fout > 100MHz 45 55 %
NOTE: Electrical parameters are guaranteed over the specifi ed ambient operating temperature range, which is established when the
device is mounted in a test socket with maintained transverse airfl ow greater than 500 lfpm. The device will meet specifi cations after
thermal equilibrium has been reached under these conditions.
NOTE 1: Measured from the V
DD
/2 of the input to V
DD
/2 of the output.
NOTE 2: Defi ned as skew between outputs at the same supply voltage and with equal load conditions. Measured at V
DD
/2 of the output.
NOTE 3: Defi ned as skew between outputs on different devices operating at the same supply voltage, same temperature, same
frequency and with equal load conditions at the same temperature. Using the same type of inputs on each device, the outputs are
measured at V
DD
/2 of the output.
NOTE 4: This parameter is defi ned in accordance with JEDEC Standard 65.
