AD8564
Rev. B | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Total Analog Supply Voltage 14 V
Digital Supply Voltage 17 V
Analog Positive Supply to Digital Positive Supply −600 mV
Input Voltage
1
±7 V
Differential Input Voltage ±8 V
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −55°C to +125°C
Junction Temperature Range −65°C to +150°C
Lead Temperature Range (Soldering, 10 sec) 300°C
1
The analog input voltage is equal to ±7 V or the analog supply voltage,
whichever is less.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages (SOIC
and TSSOP). θ
JA
is specified for device in socket for PDIP.
Table 4. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
16-Lead PDIP (N) 90 47 °C/W
16-Lead Narrow Body SOIC (R) 113 37 °C/W
16-Lead TSSOP (RU) 180 37 °C/W
ESD CAUTION