PJT Open Frame Power
Supply
PJT-40W Series
/ PJT-
□□
□
All parameters are specified at 25°C ambient unless otherwise indicated.
www.DeltaPSU.com (April 2016, Rev. 01)
Specifications
Model Number PJT-12V40WBA☐
PJT-15V40WBA☐
PJT-18V40WBA☐ PJT-24V40WBA☐
Input Ratings / Characteristics
Nominal Input Voltage 100-240Vac
Input Voltage Range 90-264Vac
Nominal Input Frequency 50-60Hz
Input Frequency Range 47-63Hz
Input Current < 0.85A typ. @ 115Vac
Efficiency at 100% Load 115Vac 85.0% typ. 86.0% typ. 86.0% typ. 86.0% typ.
230Vac 86.0% typ. 87.0% typ. 87.0% typ.
Max Inrush Current (Cold Start) 30A typ. @ 115Vac, 60A typ. @ 230Vac
Leakage Current 0.1mA @ 240Vac
Output Ratings / Characteristics
Nominal Output Voltage 12Vdc 15Vdc 18Vdc 24Vdc
Factory Set Point Tolerance No potentiometer (± 5%)
Output Current 3.33A 2.67A 2.22A 1.66A
Output Power 40W
Line Regulation ± 0.5% @ 115Vac & 230Vac
Load Regulation ± 1.0% @ 115Vac & 230Vac
PARD* (20MHz)
< 120mVpp
< 150mVpp < 180mVpp < 240mVpp
Start-up Time 115Vac 2800ms typ. (100% load)
230Vac 1100ms typ. (100% load)
Hold-up Time 115Vac 18ms typ. (100% load)
230Vac 90ms typ. (100% load)
Dynamic Response
(Overshoot & Undershoot O/P Voltage)
± 5% @ 50-100% load
(Slew Rate: 0.1A/µS)
Start-up with Capacitive Loads 4,000uF Max 3,500uF Max 3,000uF Max 2,000uF Max
*PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1μF ceramic capacitor & 47μF electrolytic capacitor.
Mechanical
Dimensions 76.2 x 50.8 x 22.9 mm [ 2” x 3”]
Unit Weight 0.08 kg (0.18 lb)
Cooling System Convection
Power Supply Header
PJT-☐☐V40WBAA
Input: JST B2P3-VH (LF)(SN)
Output: JST B4P-VH (LF)(SN)
PJT-☐☐V40WBAB
Input: Molex 26-62-4030
Output: Molex 26-60-4040
PJT-☐☐V40WBAC
Input: JWT A3963WV2-3P-D
Output: JWT A3963WV2-4P
Wire AWG 22-18