MAX16904SATB52/V+T

General Description
The MAX16904 is a small, synchronous buck converter
with integrated high-side and low-side switches. The
device is designed to deliver 600mA with input voltages
from +3.5V to +28V while using only 25µA quiescent
current at no load. Voltage quality can be monitored by
observing the PGOOD signal. The MAX16904 can oper-
ate in dropout by running at 97% duty cycle, making it
ideal for automotive and industrial applications.
The MAX16904 operates at a 2.1MHz frequency, allow-
ing for small external components and reduced output
ripple. It guarantees no AM band interference. SYNC
input programmability enables three frequency modes
for optimized performance: forced fixed-frequency
operation, SKIP mode (ultra-low quiescent current of
25µA), and synchronization to an external clock. The
MAX16904 can be ordered with spread-spectrum fre-
quency modulation, designed to minimize EMI-radiated
emissions due to the modulation frequency.
The MAX16904 is available in a thermally enhanced,
3mm x 3mm, 10-pin TDFN package or a 16-pin TSSOP
package. The MAX16904 operates over the -40°C to
+125°C automotive temperature range.
Applications
Automotive
Industrial
Military
High-Voltage Input-Power DC-DC Applications
Features
o Wide +3.5V to +28V Input Voltage Range
o Tolerates Input Voltage Transients to +42V
o 600mA Minimum Output Current with Overcurrent
Protection
o Fixed Output Voltages (+3.3V and +5V)
o 2.1MHz Switching Frequency with Three Modes of
Operation
25µA Ultra-Low Quiescent Current SKIP Mode
Forced Fixed-Frequency Operation
External Frequency Synchronization
o Optional Spread-Spectrum Frequency Modulation
o Power-Good Output
o Enable-Pin Compatible from +3.3V Logic Level to
+42V
o Thermal Shutdown Protection
o -40°C to +125°C Automotive Temperature Range
o 10-Pin TDFN-EP or 16-Pin TSSOP-EP Packages
o AEC-Q100 Qualified
MAX16904
2.1MHz, High-Voltage,
600mA Mini-Buck Converter
1
19-5481; Rev 5; 6/12
EVALUATION KIT
AVAILABLE
PART
SPREAD
SPECTRUM
TEMP
RANGE
PIN-
PACKAGE
MAX16904RATB__/V+ Disabled
-40°C to
+125°C
10 TDFN-EP*
MAX16904RAUE__/V+ Disabled
-40°C to
+125°C
16 TSSOP-EP*
MAX16904SATB__/V+ Enabled
-40°C to
+125°C
10 TDFN-EP*
MAX16904SAUE__/V+ Enabled
-40°C to
+125°C
16 TSSOP-EP*
Ordering Information
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Note: Insert the desired suffix letters (from
Selector Guide
) into
the blanks to indicate the output voltage. Alternative output volt-
ages available upon request.
+
Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
*
EP = Exposed pad.
Selector Guide appears at end of data sheet.
MAX16904
2.1MHz, High-Voltage,
600mA Mini-Buck Converter
2
MAX16904_50/V+
20k
2.2µF
33k
EN
SYNC
GND
V
BAT
LEVEL
SIGNAL
PGOOD
BIAS
SUP
*PLACE INPUT SUPPLY CAPACITORS AS CLOSE AS POSSIBLE TO THE SUP PIN. SEE THE APPLICATIONS INFORMATION SECTION FOR MORE DETAILS.
4.7µF
BST
0.1µF
4.7µH
LX
10µF
PGND
5V AT 600mA
OUTS
MAX16904_33/V+
20k
2.2µF
33k
EN
SYNC
GND
V
BAT
LEVEL
SIGNAL
PGOOD
BIAS
SUP
4.7µF
BST
0.1µF
*
*
3.3µH
LX
10µF
PGND
3.3V AT 600mA
OUTS
Typical Operating Circuits
MAX16904
2.1MHz, High-Voltage,
600mA Mini-Buck Converter
3
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
SUP
= +14V, T
A
= T
J
= -40°C to +125°C, unless otherwise noted. Typical values are at T
A
= +25°C, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial
.
(Voltages referenced to GND.)
SUP, EN..................................................................-0.3V to +42V
BST to LX..................................................................-0.3V to +6V
LX..............................................................-0.3V to (V
SUP
+ 0.3V)
BST .........................................................................-0.3V to +47V
OUTS ......................................................................-0.3V to +12V
SYNC, PGOOD, BIAS............................................-0.3V to +6.0V
PGND to GND .......................................................-0.3V to +0.3V
LX Continuous RMS Current .................................................1.0A
OUTS Short-Circuit Duration ......................................Continuous
ESD Protection
Human Body Model .........................................................±2kV
Machine Model ..............................................................±200V
Continuous Power Dissipation (T
A
= +70°C)
TDFN (derate 24.4 mW/°C above +70°C)......................1951mW
TSSOP (derate 26.1 mW/°C above +70°C) ...................2089mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
PACKAGE THERMAL CHARACTERISTICS (Note 1)
TDFN
Junction-to-Ambient Thermal Resistance (θ
JA
) ...........41°C/W
Junction-to-Case Thermal Resistance (θ
JC
) ..................9°C/W
TSSOP
Junction-to-Ambient Thermal Resistance (θ
JA
) ........38.3°C/W
Junction-to-Case Thermal Resistance (θ
JC
) ..................3°C/W
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
(Note 2) 3.5 28
Supply Voltage Range V
SUP
t < 1s 42
V
EN = low 4 8
EN = high, no load 25 35
µA
Supply Current I
SUP
EN = high, continuous, no switching 1 mA
V
UVLO
Bias rising 2.8 3 3.2
UV Lockout
V
UVLO,HYS
Hysteresis 0.4
V
Bias Voltage V
BIAS
+5.5V V
SUP
+42V 5 V
Bias Current Limit I
BIAS
10 mA
BUCK CONVERTER
V
OUT
= 5V, fixed frequency -2.0% 5 +2.5%
V
OUT,5V
V
OUT
= 5V, SKIP mode
(Note 3)
-2.0% 5 +4%
V
OUT
= 3.3V, fixed frequency -2.0% 3.3 +2.5%
Voltage Accuracy
V
OUT,3.3V
V
OUT
= 3.3V, SKIP mode
(Note 3)
6V V
SUP
18V,
I
LOAD
= 0 to 600mA,
T
A
= -40°C to
+125°C
-2.0% 3.3 +4%
V

MAX16904SATB52/V+T

Mfr. #:
Manufacturer:
Maxim Integrated
Description:
Switching Voltage Regulators 2.1MHz, High-Voltage, Mini-Buck Converter
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union