TWR-MCF51MM-KIT

TOWER SYSTEM
(continued from previous page)
1. Look for the “MCF51MM POT ADC”
application in the DVD under the
“Software” tab, “Labs” section. Copy
the file to your working directory and
unzip it.
2. Start CodeWarrior by selecting it
from the Windows Start menu. Make
sure you open Version 6.3 if you have
multiple versions installed.
3. From the CodeWarrior main menu,
choose File > Open and open the
following file: d:\work\POT_ADC\
MCF51MM_POT_ADC\POT_ADC.
mcp.
This is the project you just created
in number 1 above.
4. In CodeWarrior, click Debug.
This will activate the hiwave
debugger which also displays the
following message. Click OK and
CodeWarrior will use the on-board
OSBDM circuit to erase and program
the MCF51MM256 internal flash.
5. In the True-Time Simulator and
Real-Time Debugger window
click (start and continue) to
run the application. Rotate the
potentiometer back and forth from the
TWR-MCF51MM module. You will see
that LED 1 to LED 4 will turn off and
on sequentially depending upon the
rotation of the potentiometer.
6. In the same debugger window,
you can click on this button
to halt the application. The
source window will stop at the line of
code where you halt the application.
7. These buttons
allow you to do
Single Step, Step Over, Step Out
and Assembly Step in your project.
STEP
4
TOWER SYSTEM Quick Start Guide for TWR-MCF51MM
Demonstrate
the Labs
Lab 1: MED-EKG Development
Board Demo—Set up hardware
and run software to read your
electrocardiography
Lab 2: Interfacing with HealthLink and
Google Health—Send emulated health
data to HealthLink and Google Health
Lab 3: Low-Power and Measurement
Engine Demo—Explore the energy
savings capability of the MCF51MM256
and its powerful built-in analog modules
such as OPAMP, DAC and ADC
Lab 4: Measurement Engine
Demo Using MQX RTOSRun the
measurement engine demo using
MQX RTOS, a free RTOS that is
complementary to customers
Lab 5: Accelerometer Demo
Sample accelerometer outputs and
display a GUI via the MCF51MM256
serial function
Lab 6: USB Bootloader—Use a USB
bootloader GUI tool to update firmware
via the MCF51MM256 USB interface
NOTE: Lab 1 is printed and included in the MED-
EKG box the TWR-MCF51MM KIT. Digital copies of
all six labs are included in the DVD in the “Software”
tab, “Labs” section.
STEP
5
TOWER SYSTEM
To learn more about the TWR-MCF51MM-KIT and other Freescale medical products,
please visit freescale.com/MCF51MM, freescale.com/medical and freescale.com/Tower.
Freescale, the Freescale logo and CodeWarrior are trademarks of
Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Flexis and
Processor Expert are trademarks of Freescale Semiconductor, Inc. All
other product or service names are the property of their respective
owners.©2010FreescaleSemiconductor,Inc.
Doc Number: MCF51MMQSG / REV 1
AgileNumber:926-26047/REVB
TOWER SYSTEM
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor
products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits
or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale
Semiconductor makes no warranty, representation, or guarantee regarding the suitability of its products for any particular
purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or
circuit, and specifically disclaims any liability, including without limitation consequential or incidental damages. “Typical”
parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary indifferent
applications and actual performance may vary over time. All operating parameters, including “Typicals,” must be validated for
each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its
patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which failure of the Freescale Semiconductor product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify Freescale Semiconductor and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claims alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part.
RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics as their
non-RoHS-complaint and/or non-Pb-free counterparts.
For further information, visit freescale.com or contact your Freescale sales representative.
For information on Freescale’s Environmental Products program, visit freescale.com/epp.

TWR-MCF51MM-KIT

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
TOWER SYSTEM MCF51MM EVAL BRD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet