AD817A
Parameter Conditions V
S
Min Typ Max Units
INPUT COMMON-MODE ±5 V +3.8 +4.3 V
VOLTAGE RANGE –2.7 –3.4 V
±15 V +13 +14.3 V
–12 –13.4 V
0, +5 V +3.8 +4.3 V
+1.2 +0.9 V
OUTPUT VOLTAGE SWING R
LOAD
= 500 Ω±5 V 3.3 3.8 ±V
R
LOAD
= 150 Ω±5 V 3.2 3.6 ±V
R
LOAD
= 1 kΩ±15 V 13.3 13.7 ±V
R
LOAD
= 500 Ω±15 V 12.8 13.4 ±V
R
LOAD
= 500 Ω 0, +5 V +1.5,
+3.5 V
Output Current ±15 V 50 mA
±5 V 50 mA
0, +5 V 30 mA
Short-Circuit Current ±15 V 90 mA
INPUT RESISTANCE 300 kΩ
INPUT CAPACITANCE 1.5 pF
OUTPUT RESISTANCE Open Loop 8 Ω
POWER SUPPLY
Operating Range Dual Supply ±2.5 ±18 V
Single Supply +5 +36 V
Quiescent Current ±5 V 7.0 7.5 mA
T
MIN
to T
MAX
±5 V 7.5 mA
±15 V 7.5 mA
T
MIN
to T
MAX
±15 V 7.0 7.5 mA
NOTES
1
Full power bandwidth = slew rate/2 π V
PEAK
.
Specifications subject to change without notice.
AD817
REV. B
–3–
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Internal Power Dissipation
2
Plastic (N) . . . . . . . . . . . . . . . . . . . . . . See Derating Curves
Small Outline (R) . . . . . . . . . . . . . . . . . See Derating Curves
Input Voltage (Common Mode) . . . . . . . . . . . . . . . . . . . . ±V
S
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . ±6V
Output Short Circuit Duration . . . . . . . . See Derating Curves
Storage Temperature Range N, R . . . . . . . . .–65°C to +125°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C
NOTES
1
Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2
Specification is for device in free air: 8-pin plastic package: θ
JA
= 100°C/watt;
8-pin SOIC package: θ
JA
= 160°C/watt.
MAXIMUM POWER DISSIPATION – Watts
AMBIENT TEMPERATURE –
°
C
2.0
1.5
0
–50 90–40 –30 –20 –10 0 10 20 30 50 60 70 8040
1.0
0.5
8-PIN MINI-DIP PACKAGE
8-PIN SOIC PACKAGE
T
J
= +150
°
C
Maximum Power Dissipation vs. Temperature
WARNING!
ESD SENSITIVE DEVICE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD817 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.