LT3651-8.2/LT3651-8.4
22
36518284fa
For more information www.linear.com/LT3651-8.2
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
5.00 ±0.10
NOTE:
1. DRAWING IS NOT A JEDEC PACKAGE OUTLINE
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
PIN 1
TOP MARK
(SEE NOTE 6)
35
1
2
36
BOTTOM VIEW—EXPOSED PAD
4.50 REF
6.00 ±0.10
R = 0.125
TYP
0.25 ±0.05
2.54 ±0.10
3.45
±0.10
(UHE36MA) QFN 0410 REV A
0.50 BSC
3.45
±0.10
1.52 ±0.10
2.54 ±0.05
1.52
±0.05
3.45 ±0.05 3.45 ±0.05
0.75 ±0.05
0.00 – 0.05
0.200 REF
RECOMMENDED SOLDER PAD LAYOUT
APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED
3.50 REF
0.40 ±0.10
0.70 ±0.05
0.50 BSC
4.50 REF
3.50 REF
4.10 ±0.05
5.50 ±0.05
5.10 ±0.05
6.50 ±0.05
0.25 ±0.05
PACKAGE
OUTLINE
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.20mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
PIN 1 NOTCH
R = 0.30 TYP
OR 0.35 × 45°
CHAMFER
R = 0.10
TYP
UHE Package
Variation: UHE36MA
36-Lead Plastic QFN (5mm × 6mm)
(Reference LTC DWG # 05-08-1753 Rev A)
0.25 ±0.05
0.76 ±0.05
LT3651-8.2/LT3651-8.4
23
36518284fa
For more information www.linear.com/LT3651-8.2
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
REVISION HISTORY
REV DATE DESCRIPTION PAGE NUMBER
A 07/15 Modified Typical Application circuit.
Modified Efficiency/Power Loss curve.
Changed typical values of Boost Supply Current/ Switch Drive.
Modified Typical Performance Characteristic curves.
Clarified GND Pin Function description.
1
1
3
6
7
LT3651-8.2/LT3651-8.4
24
36518284fa
For more information www.linear.com/LT3651-8.2
LINEAR TECHNOLOGY CORPORATION 2012
LT 0715 REV A • PRINTED IN USA
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
FAX: (408) 434-0507
www.linear.com/LT3651-8.2
PART NUMBER DESCRIPTION COMMENTS
LT3651-4.1/LT3651-4.2 Monolithic 4A Switch Mode Synchronous
1-Cell Li-Ion Battery Charger
Standalone, 4.75 ≤ V
IN
≤ 32V (40V Abs Max), 1MHz, 4A, Programmable Charge
Current Timer or V/10 Termination 5mm × 6mm QFN-36 Package
LT3650 2A Monolithic Li-Ion Battery Charger High Efficiency, Wide Input Voltage Range Charger, Time or Charge Current
Termination, Automatic Restart, Temperature Monitoring, Programmable Charge
Current, Input Current Limit, 12-Lead DFN and MSOP Packages
LT3652/LT3652HV Power Tracking 2A Battery Charger Input Supply Voltage Regulation Loop for Peak Power Tracking in (MPPT)
Solar Applications, Standalone, 4.95V ≤ V
IN
≤ 32V (40V Abs Max), 1MHz, 2A
Programmable Charge Current, Timer or C/10 Termination, 3mm × 3mm DFN-12
Package and MSOP-12 Packages. LT3652HV Version Up to V
IN
= 34V
LTC4000 High Voltage High Current Controller for
Battery Charging and Power Management
Complete High Performance Battery Charger When Paired with a DC/DC Converter
Wide Input and Output Voltage Range: 3V to 60V ±0.25% Accurate Programmable
Float Voltage, Programmable C/X or Timer Based Charge Termination NTC Input for
Temperature Qualified Charging, 28-Lead 4mm × 5mm QFN or SSOP Packages
LTC4002 Standalone Li-Ion Switch Mode
Battery Charger
Complete
Charger for 1- or 2-Cell Li-Ion Batteries, Onboard T
imer Termination,
Up to 4A Charge Current, 10-Lead DFN and SO-8 Packages
LTC4006 Small, High Efficiency, Fixed Voltage
Li-Ion Battery Charger with Termination
Complete Charger for 2-, 3- or 4-Cell Li-Ion Batteries, AC Adapter Current Limit
and Thermistor Sensor, 16-Lead Narrow SSOP Package
LTC4007 High Efficiency, Programmable V
oltage
Battery Charger with Termination
Complete Charger for 3- or 4-Cell Li-Ion Batteries, AC Adapter Current Limit,
Thermistor Sensor and Indicator Outputs, 24-Lead SSOP Package
LTC4008 4A, High Efficiency, Multi-Chemistr
y
Battery Charger
Complete Charger for 2- to 6-Cell Li-Ion Batteries or 4- to 18-Cell Nickel Batteries,
Up to 96% Efficiency, 20-Lead SSOP Package
LTC4009/LTC4009-1
LTC4009-2
High Efficiency, Multi-Chemistr
y
Battery Charger
Complete Charger for 1- to 4-Cell Li-Ion Batteries or 4- to 18-Cell Nickel Batteries,
Up to 93% Efficiency, 20-Lead (4mm × 4mm) QFN Package, LTC4009-1 for 4.1V
Float Voltage, LTC4009-2 for 4.2V Float Voltage
LTC4012/LTC4012-1/
LTC4012-2/LTC4012-3
4A, High Efficiency, Multi-Chemistry
Battery Charger with PowerPath Control
PowerPath Control, Constant-Current/Constant-V
oltage Switching Regulator
Charger, Resistor, Voltage/Current Programming, AC Adapter Current Limit and
Thermistor Sensor and Indicator Outputs, 1 to 4-cell Li, Up to 18-cell Ni, SLA and
SuperCap Compatible; 4mm × 4mm QFN-20 Package; LTC4012-1 Version for 4.1V
Li Cells, LTC4012-2 Version for 4.2V Li Cells, LTC4012-3 Version Has Extra GND Pin
RELATED PARTS
TYPICAL APPLICATION
9V to 32V 4A Charger with 3-Hour Charge Timeout, 6.3A Input Current
Limit, 10ms Soft-Start and Battery Temperature Monitoring
ACPR
FAULT
CHRG
RT
TIMER
BOOST
SENSE
BAT
I
LIM
GND
RNG/SS
NTC
CLP
SHDN SW
R
IL
16mΩ
CLN
F
NC
C
TIMER
0.68µF
C
BAT
100µF
0.47µF
NTC B
10k
3651 TA04
3.3µH
TO
SYSTEM
LOAD
R
SENSE
24mΩ
R
T
54.9k
V
IN
V
LOGIC
TO
CONTROLLER
1N5819
LT3651-8.2
LT3651-8.4
V
IN
C
IN
22µF
F
50k
50k50k50k
SBM540
+
2-CELL
Li-Ion
BATTERY

LT3651EUHE-8.4#PBF

Mfr. #:
Manufacturer:
Analog Devices / Linear Technology
Description:
Battery Management Monolithic 4A High Voltage Li-Ion Battery Charger
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union