OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

B72210P2171K101

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22
2.3 Tape dimensions (in mm)
Sym-
bol
= 5.0 Tolerance = 7.5 Tolerance = 10.0 Tolerance Remarks
w max. max. max. see tables in
each series
th max. max. max. under
"Dimensions"
d 0.6 ±0.05 0.8 ±0.05 1.0 ±0.05
P
0
12.7 ±0.3 12.7
1)
±0.3 12.7 ±0.3 ±1 mm/20
sprocket holes
P
1
3.85 ±0.7 8.95 ±0.8 7.7 ±0.8
F 5.0 +0.6/0.1 7.5 ±0.8 10.0 ±0.8
∆h 0 ±2.0 depends on s depends on s measured at
∆p 0 ±1.3 0 ±2.0 0 ±2.0 top of compo-
nent body
W 18.0 ±0.5 18.0 ±0.5 18.0 ±0.5
W
0
5.5 min. 11.0 min. 11.0 min. Peel-off
force > 5 N
W
1
9.0 ±0.5 9.0 +0.75/0.5 9.0 +0.75/0.5
W
2
3.0 max. 3.0 max. 3.0 max.
H 18.0 +2.0/0 18.0 +2.0/0 18.0 +2.0/0
2)
H
0
16.0
(18.0)
±0.5 16.0
(18.0)
±0.5 16.0 ±0.5
3)
H
1
32.2 max. 45.0 max. 45.0 max.
D
0
4.0 ±0.2 4.0 ±0.2 4.0 ±0.2
t 0.9 max. 0.9 max. 0.9 max. without lead
L 11.0 max. 11.0 max. 11.0 max.
L
1
0.5 max.
1) Taping with P
0
= 15.0 mm upon request
2) Applies only to uncrimped types
3) Applies only to crimped types (H
0
= 18 upon request)
Leaded varistors B722*
AdvanceD-MP, S10 series
Page 13 of 22Please read Cautions and warnings and
Important notes at the end of this document.
2.4 Taping mode
Example: B72210S0271K1
5
1
|
Digit 14
Digit 14 Taping
mode
Reel type Seating plane height H
0
for crimped types
mm
Seating plane height H
for uncrimped types
mm
Pitch distance
P
0
mm
0 Bulk
1 G I 16 18 12.7
2 G2 I 18 12.7
3 G3 II 16 18 12.7
4 G4 II 18 12.7
5 G5 III 16 18 12.7
6 GA Ammo pack 16 18 12.7
7 G2A Ammo pack 18 12.7
Internal coding for special taping
G6 III 18 12.7
G10 II 16 18 15.0
G11 II 18 15.0
G10A Ammo pack 16 18 15.0
G11A Ammo pack 18 15.0
2.5 Reel dimension
Dimensions (in mm)
Reel type d f n w
I 360 max. 31 ±1 approx. 45 54 max.
II 360 max. 31 ±1 approx. 55 64 max.
III 500 max. 23 ±1 approx. 59 72 max.
If reel type III is not compatible with insertion equipment because of its large diameter, nominal
disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3).
Leaded varistors B722*
AdvanceD-MP, S10 series
Page 14 of 22Please read Cautions and warnings and
Important notes at the end of this document.
2.6 Ammo pack dimensions
3 Lead configuration
Straight leads are standard for disk varistors. Other lead configurations as crimp style or cus-
tomer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads
(non-standard) are differently crimped for technical reasons; the individual crimp styles are denot-
ed by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below.
The crimp styles of the individual types can be seen from the type designation in the ordering ta-
bles.
3.1 Crimp style mode
Example: B72210S0271K
5
01
|
Digit 13
Digit 13 of ordering code Crimp style Figure
1 Standard, straight leads 1
2 S2 2
3 S3 3
5 S5 4
Available upon request
Internal coding 5
Leaded varistors B722*
AdvanceD-MP, S10 series
Page 15 of 22Please read Cautions and warnings and
Important notes at the end of this document.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22

B72210P2171K101

Mfr. #:
Buy B72210P2171K101
Manufacturer:
EPCOS / TDK
Description:
Varistors 10mm / 175v
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet