2810078 Datasheet 2810078 | P1-P3

1Description

Configurable 3-way isolating amplifier

MINI MCR-SL-U-UI

Data sheet

The 6.2 mm wide MINI MCR-SL-U-UI(-SP)(-NC) configurable

3-way isolating amplifier is used to electrically isolate, condi-

tion, amplify, and filter standard signals.

On the input side, 0 ... 24 V and 0 ... 30 V signals can be pro-

cessed.

The standard analog signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V,

2 ... 10 V, 0 ... 5 V or 1 ... 5 V are available electrically isolated

on the output side.

The DIP switches, which can be accessed on the side of the

housing, are used to configure the input and output signal

ranges.

The power supply (19.2..30 V DC) can be supplied either via

connection terminal blocks "3"/"4" or "7"/"8" on the modules

or in conjunction with the DIN rail connector. Please refer to

the section titled "Power supply" for more information.

Features

– Configurable 3-way isolating amplifier

– Input and output signal range configurable via DIP

switches

– Approval for Ex-zone 2 (nA)

– Screw or spring-cage connection can be provided

– Can be supplied configured or unconfigured

Attention: Correct usage in potentially explosive areas

The module is a category 3 item of electrical equipment. It is absolutely vital to follow the instructions provided

here during installation and observe the information in the "Safety regulations and installation notes".

Make sure you always use the latest documentation.

It can be downloaded from the product at www.phoenixcontact.net/catalog

This data sheet is valid for all products listed on the following page:

101744_en_05

2012-01-05

MINI MCR-SL-U-UI

101744_en_05 PHOENIX CONTACT 2

2Table of contents

1 Description .............................................................................................................................. 1

2 Table of contents..................................................................................................................... 2

3 Ordering data .......................................................................................................................... 3

3.1 Order key .......................................................................................................................... 3

4 Technical data ......................................................................................................................... 4

5 Safety regulations and installation notes.................................................................................. 6

5.1 Installation notes ................................................................................................................. 6

5.2 Installation in the Ex area (zone 2)............................................................................................ 6

6 Installation ............................................................................................................................... 7

6.1 Connection notes ................................................................................................................ 7

6.2 Structure ........................................................................................................................... 7

6.3 Block diagram..................................................................................................................... 7

6.4 Power supply...................................................................................................................... 7

6.5 Assembly........................................................................................................................... 8

6.6 Connecting the wires ............................................................................................................ 8

7 Configuration ........................................................................................................................... 9

7.1 Configuration table............................................................................................................... 9

8 Adjustment .............................................................................................................................. 9

9 Connection/application example ........................................................................................... 10

MINI MCR-SL-U-UI

101744_en_05 PHOENIX CONTACT 3

3.1 Order key

(standard configuration entered as example)

Description Type Order No. Pcs. / Pkt.

MCR 3-way isolation amplifier, with configurable input/output, for electrical

isolation and conversion of analog signals up to 30 V, with screw connec-

tion, order configuration

MINI MCR-SL-U-UI 2864053 1

MCR 3-way isolation amplifier, with configurable input/output, for electrical

isolation and conversion of analog signals up to 30 V, with spring-cage con-

nection, order configuration

MINI MCR-SL-U-UI-SP 2811213 1

MCR 3-way isolation amplifier, with configurable input/output, for electrical

isolation and conversion of analog signals up to 30 V, with screw connec-

tion, standard configuration

MINI MCR-SL-U-UI-NC 2865007 1

MCR 3-way isolation amplifier, with configurable input/output, for electrical

isolation and conversion of analog signals up to 30 V, with spring-cage con-

nection, standard configuration

MINI MCR-SL-U-UI-SP-NC 2810078 1

3Ordering data

Accessories Type Order No. Pcs. / Pkt.

DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be

snapped onto NS 35/... DIN rails according to EN60715

ME 6,2 TBUS-2 1,5/5-ST-3,81 GN 2869728 10

MCR power terminal block for supplying several MINI Analog modules via

the DIN rail connectors, with screw connection, current consumption up to

max. 2A

MINI MCR-SL-PTB 2864134 1

MCR power terminal block for supplying several MINI-ANALOG modules

via the DIN rail connectors, with spring-cage connection, current consump-

tion up to max. 2A

MINI MCR-SL-PTB-SP 2864147 1

Eight MINI analog signal converters with screw connection method can be

connected to a control system using a system adapter and system cabling

with a minimum of wiring and very low error risk.

MINI MCR-SL-V8-FLK 16-A 2811268 1

DIN rail power supply unit, primary-switched mode, slim design, output: 24

V DC / 1.5 A

MINI-SYS-PS-100-240AC/24DC/1.5 2866983 1

DIN rail power supply unit, primary-switched mode, slim design, output: 24

V DC / 1.5 A, ATEX approval

MINI-PS-100-240AC/24DC/1.5/EX 2866653 1

Label for extended marking of MINI MCR modules in connection with the

MINI MCR-DKL

MINI MCR-DKL-LABEL 2810272 10

Fold up transparent cover for MINI MCR modules with additional labeling

option using insert strips and flat Zack marker strip 6.2 mm

MINI MCR DKL 2308111 10

2864053 = IN38 = 0 ... 24 V OUT01 = 0 ... 20 mA NONE = Without factory

...-U-UI IN39 = 0 ... 30 V OUT02 = 4 ... 20 mA

OUT03 = 0 ... 10 V

2811213 = OUT04 = 2 ... 10 V

...-U-UI-SP OUT05 = 0 ... 5 V

OUT06 = 1 ... 5 V

Order No.

Input Output Factory calibration certificate

2864053 / IN39 / OUT01 / NONE

P1-P3 P4-P6 P7-P9 P10-P10

2810078

Mfr. #:

Buy 2810078

Manufacturer:

Phoenix Contact

Description:

Terminal Block Interface Modules MINI MCR-SL-U-UI- SP-NC

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2810078