OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL6596CRZ

P1-P3P4-P6P7-P9P10-P12
10
FN9240.2
November 10, 2015
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com
.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make
sure that you have the latest revision.
DATE REVISION CHANGE
November 10, 2015 FN9240.2 Updated the Ordering Information table on page 1
Added Revision History and About Intersil sections.
Updated Package Outline Drawing L10.3X3C to the latest revision.
-Revision 2 to Revision 3 changes - Removed package outline and included center to center distance
between lands on recommended land pattern. Removed Note 4 "Dimension b applies to the metallized
terminal and is measured between 0.18mm and 0.30mm from the terminal tip." since it is not applicable to
this package. Renumbered notes accordingly.
-Revision 3 to Revision 3 changes - Tiebar Note 4 updated From: Tiebar shown (if present) is a non-
functional feature. To: Tiebar shown (if present) is a non-functional feature and may be located on any of
the 4 sides (or ends).
ISL6596
11
FN9240.2
November 10, 2015
ISL6596
Package Outline Drawing
L10.3x3C
10 LEAD DUAL FLAT PACKAGE (DFN)
Rev 4, 3/15
located within the zone indicated. The pin #1 identifier may be
Unless otherwise specified, tolerance : Decimal ± 0.05
The configuration of the pin #1 identifier is optional, but must be
Dimensions in ( ) for Reference Only.
Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
5.
either a mold or mark feature.
3.
4.
2.
Dimensions are in millimeters.1.
NOTES:
BOTTOM VIEW
DETAIL "X"
SIDE VIEW
TYPICAL RECOMMENDED LAND PATTERN
TOP VIEW
(4X) 0.10
INDEX AREA
PIN 1
PIN #1 INDEX AREA
C
SEATING PLANE
BASE PLANE
0.08
SEE DETAIL "X"
C
C
4
5
5
A
B
0.10
C
2
6
10
1
0.90
0.20
0.50
2.38
3.00
(10x 0.25)
(8x 0.50)
2.38
1.64
(10 x 0.60)
3.00
0.05
0.20 REF
10 x 0.25
10x 0.40
1.64
CB
MAX
(4X) 0.10
CB
M
6. Compliant to JEDEC MO-229-WEED-3 except for E-PAD
dimensions.
2.80 TYP
Tiebar shown (if present) is a non-functional feature and may be
located on any of the 4 sides (or ends).
12
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN9240.2
November 10, 2015
ISL6596
Small Outline Plastic Packages (SOIC)
M8.15 (JEDEC MS-012-AA ISSUE C)
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
SYMBOL
INCHES MILLIMETERS
NOTESMIN MAX MIN MAX
A 0.0532 0.0688 1.35 1.75 -
A1 0.0040 0.0098 0.10 0.25 -
B 0.013 0.020 0.33 0.51 9
C 0.0075 0.0098 0.19 0.25 -
D 0.1890 0.1968 4.80 5.00 3
E 0.1497 0.1574 3.80 4.00 4
e 0.050 BSC 1.27 BSC -
H 0.2284 0.2440 5.80 6.20 -
h 0.0099 0.0196 0.25 0.50 5
L 0.016 0.050 0.40 1.27 6
N8 87
0° 8° 0° 8° -
Rev. 1 6/05
P1-P3P4-P6P7-P9P10-P12

ISL6596CRZ

Mfr. #:
Buy ISL6596CRZ
Manufacturer:
Renesas / Intersil
Description:
Gate Drivers SYNCHCT BUCK MSFT METAL OPTION
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet